Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Phurniture and Model 112 Lowboys
#1

Drew asked in another topic:

Drew Wrote:I'm sort surprized these don't bring higher prices, such a nice console. We discused these in the Bel Geddes posting about a month ago...lots of interesting history go along with them. Question; any update on furniture factories related to the 112, mine has a stamp which says 'Factory 28'. Other factory numbers have been listed, I think Philcos with 'factory 16' stamp was Red Lion Furniture. I've been trying to find out who Factory 28 was for years?

Here are the factories/suppliers with known factory numbers, that made cabinets for Philco:

4 - Philco
8 - Philco
15 - Watsontown Furniture Company (later bought by Philco)
16 - Mengel Body Company
17 - Smith Cabinet Company
18 - Wabash Cabinet Company
19 - Maddox Table Company
20 - H.A. Prock Lumber Company
21 - Pennsylvania Furniture Company
25 - Red Lion Cabinet Company

Model 112 Bel Geddes lowboy cabinets were made at the following factories:

Philco (Plant 4) - 11,600
Strathroy Furniture Company - 915
Red Lion Cabinet Company (Plant 25) - 15,342
Canada Furniture Company - 500
Pooley Furniture Company - 500

TOTAL MADE - 28,857

I can't answer which plant was "Plant 28." I can say that Pooley made several cabinets for Philco, and as I recall seeing the "Plant 28" stamp before, there is a good chance it might be Pooley?

--
Ron Ramirez
Ferdinand IN
#2

Ron, Thanks for the list of cabinet makers, it's a important part of Philco history. Im getting closer to determining who 'Factory 28' was....if it was indeed Pooley, they were a very good quality cabinet maker, producing many fine pieces for Atwater Kent.
I'm surprized to see the 112 cabinet was made by at least five different companies. I guess this shows that radio cabinet production was large and complicated part of the final product back in the early 1930's. I'll add that my 112 has extra nice burled walnut veneer which is about 1/16th" thick (about twice the thickness of many cabinet veneers).
If anyone else has a 112, share it's 'Furniture Factory' number with us.

Drew
#3

Ron, thanks for posting the cabinet list. Very interesting. I did an informal survey here and have three Red Lion's, one Mengel Body Company, and one unstamped (or at least that I could find).
#4

I looked, and neither my 112 lowboy, nor a 112 highboy which I was able to see recently, have the plant stamping on back.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM

[-]
Who's Online
There are currently 8404 online users. [Complete List]
» 1 Member(s) | 8403 Guest(s)
Avatar

>