Posts: 4
Threads: 1
Joined: Mar 2012
City: ohio
I have a 41-608 that I recapped and I believe I have a cap with 1 leg in the wrong position. The unit worked after I replaced all the coupling caps and I foolishly moved one leg of one of them and now does not work. I have been over the schematic many times and can't seem to find it. This was a stupid mistake and I am fairly new to this. Anyone have one of these and can get some pictures of the underside of the chassis where the couplers are soldered? I know its a long shot but have to ask. Thanks in advance for any help. This is a wonderful radio and want to see it live again!
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Where is the side that is connected connected to???
Terry
Posts: 4
Threads: 1
Joined: Mar 2012
City: ohio
They are all hooked up, and according to the schemantic, correctly. I know theaudio side is working, I get a nice hum when I touch the volume control.
Posts: 16,307
Threads: 569
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 4
Threads: 1
Joined: Mar 2012
City: ohio
Its one of the. 05s that run beside the XXL tube and the 1st. Rf tube 7b7. There is a strip of tie points and I think Its one of those.
Posts: 4
Threads: 1
Joined: Mar 2012
City: ohio
Also, this is a 122 model.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Give us a reference number from the schematic for the component(s) in question, so we are starting from the same place.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
