Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Do I need an intervention?
#1

Just asking.


Attached Files Image(s)
   

John
Las Vegas, NV USA
#2

Not really only 3? when you get to 150 let us know, then it might be time!!
Rock
#3

Fix up the best one of the three, borrowing parts from the others if you have to, and use the other two for trade stock. That is unless you like these so much that you want on on every floor.
Regards
Arran
#4

they are all good.... I have a thing for 48-482's

John
Las Vegas, NV USA
#5

That is the "top of the line" table radio and on top of the top of the line and on top of that - - -
#6

LOL!! Someone asked me the same thing about the 2 37-116x's and 2-37-116B's I have. I just like them..what else can you say.

Glenn

Happily back in Illinois..not.
#7

37-116B???

--
Ron Ramirez
Ferdinand IN
#8

Sorry, still sleepy, I meant. 116b, not 37-116b.

Glenn

Happily back in Illinois..not.
#9

You only need an intervention if you have them stacked in ascending serial number order......Icon_mrgreen

Great radios!

Mike

Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952

#10

Not yet.
#11

I'm not into much past 1938, but the 48-482 is an excellent set!

No need for an intervention.
#12

FWIW:

Chassis # A49671 has the label (P/N 39-8507) that shows a 6SQ7GT for the 1st audio
Chassis #A 63512 and A66684 have label (P/N 39-6810) that shows the 7B6

all 3 have the 7B6 of course.

The center one has had the cabinet redone at some point, the Philco decal has the wrong font on the H. I have not pulled the chassis yet (I just got the set) so I'll have to see how much work needs to be done to it.

The bottom one still has the original C102 filter cap, and has no leakage. Almost every paper cap leaked, but the filter is as good as the day the set was built.

John
Las Vegas, NV USA
#13

John, I do believe you have a serious problem. I would be happy to help and pay shipping if you need a little relief from your affliction.
Jerry (not too far away from you, Arizona)

A friend in need is a pest!  Bill Slee ca 1970.
#14

We have 3 radios newer than 1940 and that is one of them.
#15

Well I pulled the chassis out of the one I just got, and boy was I surprised. ALL original from the power cord to the tubes. I don't think the radio ever went to the repair shop. Replaced C103/305 for a motorboating problem in FM all the screen grid bypass condensers and dropping resistors in the IF sections and C515 (a leaky silver mica) for an intermittent FM operation issue. Did an alignment and she runs like a...a.....a...like a PHILCO!

John
Las Vegas, NV USA




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
462ron
Got it. Sounds easy enough that even I could do! :lol: Thanks Mike! Ron462ron — 09:00 AM
Philco 91 Tuning Condenser
Nope it was the metal part. I got that off. In fact I took the whole thing apart. Pretty easy.dconant — 08:54 AM
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM

[-]
Who's Online
There are currently 5156 online users. [Complete List]
» 1 Member(s) | 5155 Guest(s)
Avatar

>