Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Which Tenite Parts Do You Most Need?
#16

I bought a 42PT-95 with the ivory escutcheon on Friday at the SCARS event in Carlsbad, CA, so will use it as the model. Now I need to determine the correct color(s) of the escutcheons for the various models.

Web site: http://www.masekconsulting.net
Radio Photos: http://www.photobucket.com - album id FStephenMasek
#17

That's good news. I have not been able to find my 47-204 escutcheon. And I thought I had been doing a pretty good job in thinning stuff out. Icon_confused

If it helps, the escutcheon on my 41-226 "Sled" is solid dark brown. I recently sold a 41-221 with an escutcheon that was swirled, like the 1941 eight pushbutton escutcheons that were reproduced by Larry Bordonaro, only it was lighter in color, more of a dark butterscotch.

--
Ron Ramirez
Ferdinand IN
#18

Here is the one I bought:
[Image: http://i269.photobucket.com/albums/jj77/...sfound.jpg]

Everyone, please keept he color information coming. Is dark brown the most common color?

Web site: http://www.masekconsulting.net
Radio Photos: http://www.photobucket.com - album id FStephenMasek
#19

Sorry to resurrect an old thread but I'm wondering if any repro bezels were ever made. I have a Silvertone 4769 that is missing it's bezel.
#20

(02-06-2016, 11:21 PM)rocketeer Wrote:  Sorry to resurrect an old thread but I'm wondering if any repro bezels were ever made. I have a Silvertone 4769 that is missing it's bezel.

 Nobody is reproducing escutcheons for any Silvertone models as far as I know, which is unfortunate because many Silvertones could use new plastic parts.
Regards
Arran
#21

Try finding one for a Fairbanks Morse 7A. In fact, try finding another 7A period!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 10001 online users. [Complete List]
» 1 Member(s) | 10000 Guest(s)
Avatar

>