Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Hi Guys,
Since winter is here in Illinois, garage sales and flee markets are out until spring, I've been looking on ebay and Goodwill. I always look for radios, mostly Philco, that need repair. Goodwill's prices look to be in line but I question ebay.
Is it me or are prices getting outrageous on ebay? Here's an example:
http://www.ebay.com/itm/Vintage-Philco-R...4abf92b138
Are they out of line? What do you think?
Eric
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
They rarely sell at stupid prices, but unfortunately there is an a$$ for every chair, or put nicely a cover for every pot. Yeah, like that one better.
Posts: 4,804
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
That's an asking not a receiving price anyhow. There a few sellers on there who regularly get outrageous prices and I believe that there is a well concealed shill bidding scheme or some other scam involved since the bids they are getting are way out of proportion to what identical items get from other sellers. Crazy stuff like $150 for a Philco 47-200, one you can find for under $30 without trying on the same site. Some sellers are either looking at the "pump and dump" auctions and getting their asking prices there, or are just making it up.
Regards
Arran
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
To avoid the possible shill bidding, I suggest you just put in a bid of what you think it is worth. If you lose, fine. That is it in a nut shell. If the shill goes higher, oh well. I don't like the idea of shill biding but you know what you want to pay for a radio. Shills seem to only work if someone doesn't have a max price they want to pay and they can drive that bidder up. Just my dumb idea.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
You would have a hard time squeezing $3 out of me for that radio. Forget about shipping it.
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Well I think you are right, it seems like they are getting higher ![Icon_eek Icon_eek](https://philcoradio.com/phorum/images/smilies/icon_eek.gif) . I hardly win any of the ones I bid on. And some of the shipping charges are really high. I just won a bid on an Admiral combo they were asking $275, since it was here in Louisville I talked it down to $35 and I picked it up. Some of ebay items are very much out of line but that is my thougts on the subject.
Joe
Joe Bratcher near Louisville, KY
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
It seems even the few Philcos showin up on CL around my area are kinda high lately and always the same type of early 40's models that seem to be a dime a dozen.
No matter where you go, there you are.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
There have been more than the usual number of goofy priced radios on eBay and other sites recently.
Usually they receive zero bids, unless there is shill-bidding or the thing-one-sits-on factor mentioned above.
eBay is a reflection of what people are willing to pay for a radio. Fair market value. The same is true for sellers. Something out there has recently made sellers believe that they can get an unrealistically high price for an otherwise common set.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Easier to do day trading.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
I agree, every once in a while I'm able to get one at a good price on ebay, even though it feels like it's getting harder to do so. I think going after the ones that don't work pays off. Besides that, it is more fun to bring one back to life.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 4,405
Threads: 415
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
So many other places to get radios, nothing like a good swap meet, shuffling through the neighborhood junk stores, other real radio hobbyists willing to sell fairly and know how to pack and ship. If you belong to a radio club ask around the old timers, tell them what you like or are looking for and I bet they can help, won't charge you a fortune, many are looking for good homes for their radios. Many older collectors like to pass things on to a younger collector.
Think outside the box!
Paul
Tubetalk1
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks Paul. I just joined a club and the next meeting is in Feb. I'll give it a shot.
Eric
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Good topic, I have been looking at the vintage test equipment on the bay and not knowing anything about what is an resonable price for say a variac or signal generator,tube tester etc. I'am afraid to buy. Being new to the radio restoration I would rather pay more for a known good peice of equipment from someone who deals in vintage test equipment.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Hi Mike,
I have to say that I've done real well with test equipment on ebay. So far I've aquired a tube tester, Variac, RF signal generator and a frequency counter.
They way I did it was as soon as I saw what I wanted I searched the web to see what others have said about the item. I also only bought items that had the manual and any leads needed. Then I made sure that the item was in working condition and that I could return it if there was a problem. If you're carefull you'll do OK.
Eric
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Eric
Smart move, joining ARCI. You are very lucky in that you live in an area with one of the largest and most active clubs in the country. You'll meet folks there who are willing to help you when you need advice. Plus, the big Radiofest swap in August - you don't want to miss that! Lots of radios, parts, and test equipment, and you don't have to ship it home, just buy what you want and take it home with you!
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
6TPZ and 5TPO Radio Help
|
Quick progress report:
X7 is broken. Only one leg soldered, the other missing and the diode is cracked.
I've replaced...R3Sons — 05:05 PM |
6TPZ and 5TPO Radio Help
|
Oh...and you have electrolytic caps there.
All need to go and be replaced.morzh — 04:36 PM |
6TPZ and 5TPO Radio Help
|
Thanks, will do.R3Sons — 01:25 PM |
1930s Stewart-Warner Tombstone Radio need help identifying model number
|
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM |
Philco 91 Schematic
|
Hi Rod,
The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM |
Just got a 49-1613 need to know...everything!
|
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM |
B&K 1077B no video
|
Hello Tim,
I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ?
Sincerely Richardradiorich — 01:55 AM |
B&K 1077B no video
|
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM |
RCA 15X
|
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM |
B&K 1077B no video
|
Hello Tim,
I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!.
Sincerely...radiorich — 11:07 PM |
Who's Online
|
There are currently 9991 online users. [Complete List] » 1 Member(s) | 9990 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|