Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I think I'll pass on this one...
#1

Over the weekend, my wife and I did some antique shopping, and in one shop I saw a Philco 37-38 shouldered tombstone battery radio.

Here's what was done to it - the photo finish was completely stripped off (looked like plywood!), the grill cloth was replaced with something that was purple burlap, and they wanted $80 for it!

At least it was marked down from $100 to start.

No thanks. Icon_sad

Bill

Sent from my Pentium II on the AT&T Dial Network
#2

You could have asked them if there was a typo on the price tag, as in $80 instead of $8. Icon_razz

--
Ron Ramirez
Ferdinand IN
#3

Antique stores never cease to amaze me. A lot of them seem to think because something's "old", it has to be worth a fortune. I'd say the biggest laugh I ever got at an antique store was a late '40s GE AA5 radio (nothing special) with a $300 price tag on it. Of course this was up around the Washington DC area.

Tom
#4

I forgot to mention - it was also mssing 2 knobs, and one of them was the tuning dual knob!

$8 would have been a fair price for it. The cabinety issues were obvious; who knows what evil lurks in the heart of the chassis? Icon_twisted

Although, if was as low as $20, I would have started thinking about it, but only then. (I'd have taken it for $15!) Icon_eek

Bill

Sent from my Pentium II on the AT&T Dial Network
#5

Get out the handkerchief, guys!

There's a flea market hereabouts that I go to a lot. A few years ago I happened to look under a table in the outside area, and recognized a Philco shoulder tombstone with a rather obvious 16/116 chassis, looking at it from behind. I looked at the front , it was a '35 vintage 16. How much, I asked? Ten bucks, he said. I didn't want to waste time negotiating, so I paid his price. I did restore it, and let it go, as I already had one.

Some times, you just have to pay the price!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM
B&K 1077B no video
Thanks Rich! I'll take a look and see what he has. I know there's more modern equipment to be had, but this one I know a...TV MAN — 09:11 PM
B&K 1077B no video
Hello Tim, Here is a link to restoration of one on Phil's old radios site ! Sincerely Richard bk1077bradiorich — 09:01 PM
6TPZ and 5TPO Radio Help
I'm a little befuddled on this one. Should X5 and X4 be tied together like this?  It looks like someone added this at so...R3Sons — 07:33 PM

[-]
Who's Online
There are currently 4278 online users. [Complete List]
» 4 Member(s) | 4274 Guest(s)
AvatarAvatarAvatarAvatar

>