Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-84 feet and/or back?
#1

Hi all! Can anyone please tell me what kind of "feet" the 37-84 had and if it happened to have a back? Thanks So much!
#2

Very few radios in that era had backs and the 37-84 was not one of them, if it was a 37-116 then it would have had a back. As for feet I think that it may have had short rubber feet that were tacked onto the bottom of the cabinet, some sets had thick felt pads rather then rubber ones.
Regards
Arran
#3

Don't think it had either.
Terry
#4

There was another kind that weren't really feet as such, but they were these round metal runners, about 3/8'' wide, with a felt pad crimped into the center, some were nailed on and some had a screw holding them on. If this set had those originally then they would probably still be there, they aren't the kind of thing that would just fall off.
Regards
Arran
#5

It's pretty much always OK to get a set of tack like feet with felt or rubber bottoms for a wooden cabinet radio to keep it from maring anything it is placed upon. Look carefully for tack holes where the originals might have been, if there were any. Stick on felts usually don't work out well on wooden bottom radios.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 630csx power cord
Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM
B&K 1077B no video - problem solved
Hello Tim, Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM
B&K 1077B no video
I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike Here is the Link to the company the place is called Grand Brass lamp parts . I buy all my Lamp parts plus ...radiorich — 12:00 AM
Philco 40-120C Filament Wiring
Is the tube in your radio actually 35Z3 or 35Y4, or something else?morzh — 10:55 PM
Philco 630csx power cord
Second Rich's opinion. Run a separate antenna wire. Use a separate plug. Rich Where did you get this wire? Se...morzh — 10:51 PM

[-]
Who's Online
There are currently no members online.

>