Philco 650B, newly refinished
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Barry Jones, a local radio collector and cabinet refinisher, returned my 650B cabinet to me tonight.
Below, I have posted a single picture showing a "before" shot (left) and and "after" photo (right) which illustrates his work.
[Image: http://www.philcoradio.com/images/phorum/ARF/650ba.jpg]
What a difference, eh? 
No, I have not yet restored the chassis. The grille cloth is from an old 1937 Philco console; there was just enough good cloth left to use in this tombstone. The pattern is correct for this model.
I am frankly amazed at how well the front panel looks now. Before, it was very dingy and dirty, darker than the picture at left indicates. Barry fixed the lifting veneer around the tone control shaft which can be seen in the left photo; no damage at all is evident in the right photo.
Whaddya think, folks?
--
Ron Ramirez
Ferdinand IN
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Looks like the photos in your books! ;)
Superb cabinet restoration.....
Posts: 909
Threads: 117
Joined: Jun 2007
Great looking cab Refin Ron!! Saving all that orig grillcloth is very impressive also!! That will be a Pfine Philco once you rebuild the chassis!! Have fun!!  Randal
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Hope my 116B cabinets come out like that. Nice job!
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Thank you, Chuck, Randal and Brian, but all the credit must go to Barry for this one. Like I said, I have yet to touch the chassis. I only added the grillecloth.
I've sent Barry a link to this page; I'm sure he will appreciate your comments.
The guy does great work with cabinets, quite frankly.
--
Ron Ramirez
Ferdinand IN
Posts: 909
Threads: 117
Joined: Jun 2007
Barry, You do GREAT work indeed!! Absolutely astonishing!! I have a orig 91-L lowboy cab needing attention!! HELP!!! Randal
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
It's so refreshing to see that someone knows how to refinish these cabinets right. My 650B turned out sorta like this, but the tinted lacquer on the sides came out a smidge too red. Ron once had a picture of it. Now, I'm ashamed of myself.
And when it'll be re-capped......what a H**l of a radio!
Awright, Ron; I misspelled that word.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Once recapped, I hope my 650B will be a H**l of a radio also, Doug! 
Ha-ha; word censor in action
Doug, I still have that picture of your 650B around here somewhere.
In case anyone is wondering, the top, sides and trim of my 650B are NOT black, but a very dark brown, very close to the original color.
--
Ron Ramirez
Ferdinand IN
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 17
Threads: 3
Joined: Mar 2008
Oh, that is soo nice! I can't wait to get mine fixed up too. 
For lively debate that is Libertarian/Classic Liberal oriented, try Ai-Jane.org. We aim to please.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Brian, neat videos...thanks for sharing!
--
Ron Ramirez
Ferdinand IN
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
Really makes you want to get that 650 or the like going eh This sets reception rivals my 116B. I need to do a real side by side comparison when I get my 116B back up & running.
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Well, now if a 650 can rival a 116, then you have my attention...
Yes, now I'm going to have to find time to restore the chassis of my 650B.
--
Ron Ramirez
Ferdinand IN
Posts: 393
Threads: 40
Joined: Sep 2007
City: St Clair Shores, MI, USA
To be fair, the 116B wasn't yet restored(still isn't) but it worked quite well. I also never aligned it to make sure sensitivity was on the up and up. Last time I used was spring of 07 and I don't recall it working any better than this set. In fact I recall SW reception being a little weaker. But again it's not a fair test yet. I need to get going on it again. I have it half way done but I've been to lazy to get back on her  Plus, I have a second one that is complete, but dead. Maybe next year for that one. I need to get both cabinets done. One was damaged in shipping due to poor packing. Long story on that one 
-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I feel your pain, Brian.
If you look at the picture in my first post in this thread, you'll notice veneer damage around the left control - that lifting veneer was caused by poor packaging. The chassis bounced around during shipment, causing that veneer damage. The bolts were also out of the power transformer, for whatever reason, and that flipped up and down during shipment, breaking some wires. One of the back "feet" was also broken.
Barry fixed the cabinet problems, and as you have seen, did a great job.
Fortunately, I have two extra 650 chassis, so one will yield a power transformer for this one.
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Restore Code ??
|
| No, that cannot be the 47.
The 47 is a regular backelite block cap. Look at the chassis picture, it is shown there. Rig...morzh — 01:45 PM |
|
Philco 91 Restore Code ??
|
| I have changed the title of this thread from Philco 91 Schematic.
I have gone through most of the cap replacements. I...dconant — 01:26 PM |
|
462ron
|
| Here is an online transistor substitution site…
Ron462ron — 08:44 AM |
|
1930s Stewart-Warner Tombstone Radio need help identifying model number
|
|
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a &quo...captainclock1988 — 12:55 AM |
|
B&K 1077B no video
|
| Hello Tim,
I once had a Jcpenny 13inch tv /monitor built by NEC come into my repairshop it would start acting up at tim...radiorich — 10:59 PM |
|
Restoring Philco 96
|
| Mike;
The last time I took a potted condenser can apart, and it was maybe 1/4 the size of the one in the model 96, I ...Arran — 10:56 PM |
|
Compatible crts
|
| Bob Andersen — 08:58 PM |
|
1930s Stewart-Warner Tombstone Radio need help identifying model number
|
| One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a "...Arran — 08:41 PM |
|
Restoring Philco 96
|
| Have just aligned it. Surprisingly, it was not that much off at all. Barely.
Aligning TRF sets is pure pleasue, as ther...morzh — 07:52 PM |
|
6TPZ and 5TPO Radio Help
|
| 1 - 0v - correct
2 - 0v - correct
3 - 0v - --------------------- both 3 and 4 should be the same. Check L2 for being ope...morzh — 05:15 PM |
|
Who's Online
|
There are currently 3304 online users. [Complete List]
» 4 Member(s) | 3300 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
