Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Pilot H220 Radio @ Flea Market
#16

That may be difficult, it the knobs it uses are of the ship's wheel style. If those are the correct knobs they were also used on a post war Pilot TV. The good news is that you can buy reproductions of that style of knob, but they are not exactly cheap.
Regards
Arran
#17

Thanks, Arran. It does have the "ship's wheel" style knob. The outer ones are correct. I will just need to find the 2 inside ones which my friend thinks he may have. We will see.

Craig R.
#18

http://www.renovatedradios.com/parts.html

About 2/3 down the page Pilot TV-37 Television Knobs (KPilotTV37)
#19

Thanks BrendaAnnD for the link! I will wait to get the radio back and compare the knobs. From the pics in the link it looks as if we may have a match (if my chassis expert doesn't have any in his collection). Thanks again. Much appreciated!

Craig R.
#20

What is interesting is that this set is an AC/DC set with a combination of tubes in series-filament and parallel filament configuration.
#21

I just picked up one of these Pilot H220 (Similar to Model 224)
I need Back Photo's and dimensions as mine is missing.
Radio Otherwise Complete. All Original Knobs. They are NOT the Ships Wheel Type as used on the TV.
E-Mail sent to original Poster

Bob T
Wilmington, NC
#22

Looks like an Airline model.
#23

Wow! A buddy in Wilmington just got a hold of the same set!!

If you want to see something interesting look at the schematic for this bear!

11 tubes plus ballast AC/DC set, FOUR 25L6 output tubes, and TWO 25Z6 rectifiers!

When you add up the total filament voltages, it is 180 volts, AND the 81973 ballast is rated at 47 volts at 300mA!!

Some serious parallel and series filament strings here!!!
#24

Ah.... just noticed my buddy made the entry a couple before me......

Just remember, kids. Work HARDER, not SMARTER !!!
#25

    [attachment=3819][attachment=3819]        

Just Acquired a Pilot H220 (Same as 224) I believe

All original except for missing Back.
Paid a LOT more than $45 though
Needs Recap , but is playing on Variac

Have contacted OP to get Photo of back and Dimensions.
Heavy HUGE Radio

Bob T




Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Gary I in fact did, on a 38-14, I think, where I had a speaker with the dead coil. Well...it kinda worked. Kinda, be...morzh — 10:38 PM
An attempt to remove the Field Coil from a G speaker
Mike, what ever happened to that plan you had to try using a rare earth magnet to magnetize the pole? This looks like a...GarySP — 10:25 PM
RCA T62 is playing.....
Beautiful set.morzh — 09:07 PM
An attempt to remove the Field Coil from a G speaker
Well....here it is. The green stuff. Unfortunately, probably penetrates deep. I opened the top layer and saw that: ...morzh — 08:58 PM
Philco 91 Restore Code ??
:clap: :clap: :clap: :clap: Really nice workmanship!!! Top of the chassis looks great. Sorry about the long winded e...MrFixr55 — 08:09 PM
Philco 40-120C Restoration
Thank you for your reply. I will check voltages on the other tubes, look at resistor 23 and cap 25, etc. If all else fai...bluecap — 07:58 PM
RCA T62 is playing.....
Nice looking set great save. DavidDavid — 07:48 PM
Philco 89 indicator light.
Hello Jim, I have done several 89s. The trick is to move the drum in or out on it's shaft. You will need to loosen a set...dconant — 07:36 PM
An attempt to remove the Field Coil from a G speaker
MrFixr Yes, it is my plan to go with 45rpm spider if I go that far. No, the pole was not left-handed as I unscrewed ...morzh — 07:14 PM
Philco 40-120C Restoration
Change the tube. Check the tube's bias network. Are any other tubes experience the drop or just this?` Is resistor 23 OK...morzh — 07:09 PM

[-]
Who's Online
There are currently no members online.

>