Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 59c Cabinet Restoration
#1

Here's a summary of the restoration done on a 59c cabinet.

As received:
[Image: https://www.dropbox.com/s/7wwjji0sb2p19n....jpg?raw=1]
and
[Image: https://www.dropbox.com/s/7cs2wsu3ttmyl7....jpg?raw=1]

Stripped:
[Image: https://www.dropbox.com/s/g6idavdzvh64vi....jpg?raw=1]

Toned and a couple lacquer coats:
[Image: https://www.dropbox.com/s/8i9zhcf9mqioan....jpg?raw=1]

Decal on...almost done:
[Image: https://www.dropbox.com/s/2bh5ehrc6pe4nz....jpg?raw=1]

Done and on the shelf (the grill cloth shows a bit too green in this particular light but in reality has a more golden tone to it...its from Kenneth Richmonds offerings):
[Image: https://www.dropbox.com/s/tj386dw99d9l78....jpg?raw=1]
#2

Shiny!

Icon_thumbup

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Think that's good or bad?
#4

I think it looks great Bob, keep up the good work.

Gregb
#5

Don't get the big head <wink>, but Paul Sanders does what I consider one of the better refinishing jobs around and yours looks pretty close to his:

http://www.paulsandersclassicradios.com/...ntle-radio

Nice work on a neat little set!

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#6

Good OR BAD?

I think my little thumbs up says it all, Icon_lol

I say, the shinier the better!

Ok well, not always, My bald spot is shiny and I don't like that but for radio finishes I like them original or like the day it was put on the store shelf.

A+ job

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

Thanks for the comments guys. I keep learning from each one of these I work on and a lot of that is from this Phorums comments and threads or conversations with Phorum members. Have to get back to the 39-25 that needs attention.
#8

wow I like it Icon_thumbup Icon_clap




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 9642 online users. [Complete List]
» 3 Member(s) | 9639 Guest(s)
AvatarAvatarAvatar

>