Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Photo's Needed
#1

Hello All,

(Ron, I hope this is in the correct Discussion.) I'm putting together a little monograph on the Plant A radios. I am in need of some clear digital photos of the Plant A, Plant C, and Factory F patent plates. Factory F plates can be found on Empire, Climax and Federal radios. Also I'm looking for a photo of a schematic from the cabinet and some front and rear shots. And lastly, I'm trying to find a photo of a Gaylord Syncratone radio. Any help will be appreciated and your name in the credits! Thanks, Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#2

Don't know if these will serve you.

   

   

   

That Clinton tag is rarely seen. There is ongoing debate about just what connection there was between Clinton and Plant A. Worth noting that these Plant A/Clinton tags are the same size, color and font as the earlier Silver-Marshall tags.
#3

Exray, Many thanks for the jpeg's. I've never seen the orange tag with the Clinton logo before. This is going to sound odd, I should know your name beside 'Exray', but I don't. Would you PM your name to me so I can give attribution in the article? Again, many thanks. I can still use some front and rear jpeg's of Plant A, Plant C and Factory F radios if anyone out there can help. Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM

[-]
Who's Online
There are currently 6049 online users. [Complete List]
» 2 Member(s) | 6047 Guest(s)
AvatarAvatar

>