Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
For $20.00 I could not pass it up.
Needs EVERYTHING but I dont think I am going to restore it. I wanted the knobs and parts but may sell whole.
Will this speaker work for my 89?
Kirk
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Here is a pic of my display at the swap meet.
Attached Files
Image(s)
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 16,230
Threads: 563
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
A 44 can be a beautiful radio when restored properly.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Soooo much work though
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 16,230
Threads: 563
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
For you? Should be a snap. You enjoy the pain, admit it!
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
(04-09-2015, 11:22 AM) OldRestorer Wrote: Soooo much work though
Kirk
it would keep you from buying more radios at least a day or two
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 16,230
Threads: 563
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I think I know what it is: he needs some ugliness in his life, so as he restores most of the junk he has to its former beauty he has to balance it off by buying some ugly stuff again.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
(04-09-2015, 10:54 AM) OldRestorer Wrote: Will this speaker work for my 89?
Yes.
That cabinet doesn't look too bad. I've seen much worse. Bring it to me @ K-town. I might have something for you in return.
--
Ron Ramirez
Ferdinand IN
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
If it fits in the car I will bring it Ron, but the speaker is mine!
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
So how are sales at the swamp meet? Able to peddle a few things??
Terry
Posts: 3,147
Threads: 55
Joined: Apr 2011
City: Lexington, KY
(04-10-2015, 06:59 AM) Radioroslyn Wrote: So how are sales at the swamp meet? Able to peddle a few things??
Terry
Yeah, the key question is did you sell more than you bought???????
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I bought a really cool clock for $25.00. Then sold it for $40.00
Sold about 6 radios but small ones so I made a few bucks.
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
(04-09-2015, 01:27 PM) OldRestorer Wrote: If it fits in the car I will bring it Ron, but the speaker is mine!
By all means, keep the speaker.
--
Ron Ramirez
Ferdinand IN
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
And the knobs, and the tubes, and the cabinet! Oh wait, that leaves nothing for you
Kidding
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,468
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Kirk....Nice little set up where was the meet? How was the turnout? How did you do?
Users browsing this thread: 2 Guest(s)
Recent Posts
Philco 40-120C Filament Wiring
Thank you for your replies.
That is the correct schematic and pin out diagram for the rectifier. The resistance acro...bluecap — 11:01 AM
Philco 46-480 Electronic Restoration
Late last night a guy reached out in response to my posting on the Antique Radio Forum and suggested I contact Trust Aut...jrblasde — 11:01 AM
Philco 630csx power cord
Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce,
First all do mean a 37-84b ?
Did you take any before and after pictures ?
is it a buzz like when you touch...radiorich — 01:59 AM
B&K 1077B no video - problem solved
Hello Tim,
Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM
B&K 1077B no video
I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike
Here is the Link to the company the place is called Grand Brass lamp parts .
I buy all my Lamp parts plus ...radiorich — 12:00 AM
Who's Online
There are currently 4339 online users. [Complete List ]» 1 Member(s) | 4338 Guest(s)