Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Using Gojo Creme on veneer
#1

I watched a guy on YT do this to his rather nasty looking Philco, and I was amazed with the results! The Gojo Creme is about $2.00 for a good sized jar at your local auto parts store. It cleans the veneer right up! I highly recommend it. Just get a soft cloth and a small helping of the stuff and gently rub it with the grain on your Philco's veneer.


Attached Files Image(s)
   

Slave to an RCA Victor CTC-25
#2

which auto parts store?
#3

Non pumice right?
Works great!

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

I got it at O'Reilly. They have pumice, but I did not want to use that in case it would scratch.

Slave to an RCA Victor CTC-25
#5

I just did this with my 40-180. I don't have a before picture but this is the after. I love it and would recommend it to anybody. Works GREAT!


Attached Files Image(s)
   
#6

"Washing" a cabinet with go-jo is a great way to remove the years of attic dirt. It gives you a better idea just what condition your cabinet is in and whether or not you want to refinish. 

I have had many cabinets that literally "came alive" after being cleaned with go-jo. 

NEVER use the go-jo with pumice on a cabinet!!
#7

I also use the go-jo first on any cabinet I get that looks promising, no wood damage that needs repair etc.. Have had good luck with it.
#8

I"ve used it on grimey chasses as well.
#9

Found some at a NAPA store.
#10

I found it at Wallmart in the automotive department. [[hand cleaner]

   Living in Calgary Alberta
#11

Is GOOP the same stuff? Looks the same and smells the same. Its gojos competitor, I found Goop at Walmart, they didn't have gojo. I use it for my hands. Haven't tried yet on wood cabinets.
#12

Yes  goop is same thing as gojo

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#13

I'm assuming that these success stories are on cabinets that were pretty much perfect and just had years of grime build up.

My first to radios were a disaster and Gojo would have done nothing.
#14

(07-12-2015, 11:42 PM)Edisla Wrote:  I'm assuming that these success stories are on cabinets that were pretty much perfect and just had years of grime build up.

My first to radios were a disaster and Gojo would have done nothing.

Yes its just for dirt, wax build up? , grime , grudge, grease, grit, finger prints, oil, latex paint, crayons, ink, ant piss, dust, lite water marks, bullet holes, cigar burns, cigarette burns, dryed whiskey, spilt soda, beer, tea, coffee, also repels spiders , roaches, piss ants, silverfish , etc. Icon_wave Icon_wave Icon_wave Icon_wave Just messen around Edisla Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy Icon_crazy
#15

I use Non pumice Goop and 0000 steel wool.  I just cleaned up a 46-1203 last night and it came out looking great!  In fact I think I'll change my avatar from the refinished 48-1256 to the original finish 46-1203!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM
B&K 1077B no video - problem solved
Hello Tim, Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM
B&K 1077B no video
I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike Here is the Link to the company the place is called Grand Brass lamp parts . I buy all my Lamp parts plus ...radiorich — 12:00 AM
Philco 40-120C Filament Wiring
Is the tube in your radio actually 35Z3 or 35Y4, or something else?morzh — 10:55 PM
Philco 630csx power cord
Second Rich's opinion. Run a separate antenna wire. Use a separate plug. Rich Where did you get this wire? Se...morzh — 10:51 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. - your 0.047 caps are fried in both Th...morzh — 10:40 PM

[-]
Who's Online
There are currently no members online.

>