Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

38-C-12A coronation model value?
#1

Hello all. I'm new to this forum and have a question about model 38-C-12A. This was manufactured in Canada to commemorate the coronation of King George VI and his wife Elizabeth. I believe it to be fairly rare and was hoping some knowledgeable Philco collector might be able to give me an idea of value. I'm starting to get rid of some of my collection so I can focus my collecting in one particular area (whatever they eventually may be). The cabinet has been stripped except for the small area around the emblem, but looks to be in decent shape. It has the right period grille cloth but I don't believe it is original. I also think there is something missing around the dial but don't know what that might be. I'd appreciate any help you could provide.
Smokey Joe


Attached Files Image(s)
                   
#2

Don't know about worth but the dial is normal. It did have a dark brown paint on the wood but when it was stripped it was removed. Add some brown the the edge and it will look original.

Terry

ps How's the cafe??

pss You may want to try to pull the dial pointer out a bit if possible they have a nasty habit of tearing the foil off of the dial. Grille cloth looks original.
#3

(06-09-2015, 06:18 AM)Radioroslyn Wrote:  Don't know about worth but the dial is normal. It did have a dark brown paint on the wood but when it was stripped it was removed. Add some brown the the edge and it will look original.

Terry

ps How's the cafe??

pss You may want to try to pull the dial pointer out a bit if possible they have a nasty habit of tearing the foil off of the dial. Grille cloth looks original.

Thanks Terry. I do plan on re-lacquering when I get a chance. I don't know about value either, but I only know of one other with the coronation logo. It may be rare, but not necessarily worth much. I appreciate your response.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM

[-]
Who's Online
There are currently 7091 online users. [Complete List]
» 1 Member(s) | 7090 Guest(s)
Avatar

>