Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

116-122 Grille Cloth
#1

I saw a post on ARF about a guy asking what grille cloth to use for his Philco. It looked like he needed the same stuff that I will need on my 116X or 116-122 restoration project. I've included some pictures of the cabinet and a small pice of the cloth that i cut from one on the clairfiers. RD doesn't look like they have a match, matter-of-fact theirs looks like just the opposite colors that I need. Radio Daze has their cloth #41 that's close. So what cloth is out there I can use? Thanks guys.

[Image: http://i1060.photobucket.com/albums/t458...qsz94u.jpg]

[Image: http://i1060.photobucket.com/albums/t458...zzcstx.jpg]

Crist
#2

(08-27-2015, 08:29 PM)Crist Rigotti Wrote:  I saw a post on ARF about a guy asking what grille cloth to use for his Philco.  It looked like he needed the same stuff that I will need on my 116X or 116-122 restoration project.  I've included some pictures of the cabinet and a small pice of the cloth that i cut from one on the clairfiers.  RD doesn't look like they have a match, matter-of-fact theirs looks like just the opposite colors that I need.  Radio Daze has their cloth #41 that's close.  So what cloth is out there I can use?  Thanks guys.

[Image: http://i1060.photobucket.com/albums/t458...qsz94u.jpg]

[Image: http://i1060.photobucket.com/albums/t458...zzcstx.jpg]

I prefer the cloth from radio daze better, ether one is good and that's  all the choices you have son Icon_wave Icon_biggrin Icon_eek Icon_shh Be sure and order some the 2 sides Icon_eek Icon_eek
#3

Well I ordered the cloth from RD and I'm starting work on the cabinet. Not real happy with the RD cloth. I like the other cloth RD offers but it looks like the colors have been reversed.

What are people using these days?

The last picture shows how much this cloth has faded.

[Image: http://i1060.photobucket.com/albums/t458...hyzcam.jpg]

[Image: http://i1060.photobucket.com/albums/t458...fjwuvh.jpg]

[Image: http://i1060.photobucket.com/albums/t458...vp5k1w.jpg]

[Image: http://i1060.photobucket.com/albums/t458...1gxznn.jpg]

Crist
#4

(10-16-2015, 10:08 PM)Crist Rigotti Wrote:  [Image: http://i1060.photobucket.com/albums/t458...fjwuvh.jpg]

That is 1938 Philco chevron cloth; entirely wrong for 1935-37 Philco sets.

If you order from Radio Daze, you want #03 (GRC03), not #41 (GRC41).

If you order from Kenny, you want the Philco Chevron cloth.

--
Ron Ramirez
Ferdinand IN
#5

OK, I thought so. I'll return the stuff and get the GC-03 stuff.

Thanks.

Crist
#6

Thats the stuff I used on my 38-116xx or close to it


Attached Files Image(s)
       




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 10451 online users. [Complete List]
» 4 Member(s) | 10447 Guest(s)
AvatarAvatarAvatarAvatar

>