Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 650 needs TLC
#2

Hi JC and welcome. A few notes...

1. The 39-4208 I believe is simply the part number for the label.

2. Since you were getting some reception even with no antenna I'd also guess the tubes to be in reasonably good shape.

3. Definitely replace the electrolytics. You really should stick with 10uf to replace the 8uf. 22 won't kill it and you could use them temporarily but it may add a bit more load on the rectifier tube. In fact, count on replacing all the paper caps including the ones enclosed in the Bakelite boxes. There's a number of easy methods there that we can talk about later.

4. The speaker plug. That merits pronto attention. The main power supply routes thru the plug and a short there is not a good thing to have. (the intermittent could actually be something shorting out and may even account for your smoke). Mark the wires in some fashion, cut and start from fresh.

Here's a site with some good generic advice for first-timers.

http://www.antiqueradio.org/begin.htm

Have fun...and be careful!

-Bill


Messages In This Thread
Philco 650 needs TLC - by Guest - 04-03-2009, 01:12 AM
Re: Philco 650 needs TLC - by exray - 04-03-2009, 06:18 AM
Re: Philco 650 needs TLC - by Guest - 12-12-2009, 09:08 AM
Re: Philco 650 needs TLC - by exray - 12-13-2009, 06:09 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New member
Love the pic! I'm southern IL, so wouldn't be much help and Bob Anderson is very good on those, but lives in Chicago are...TV MAN — 05:25 PM
Philco 40-120C Filament Wiring
:thumbup:klondike98 — 04:56 PM
Philco 40-120C Filament Wiring
With these values I think you are OK; the Cmax for this tube is 40uF. Your Vbb could rise a bit, but probably not too mu...morzh — 04:53 PM
Philco 40-120C Filament Wiring
BTW, someone had replaced the original 20uF/20uF filter cap with a 47uF/33uF cap. Do you think these values are safe on ...bluecap — 04:33 PM
Philco 40-120C Filament Wiring
You're correct. I was misinterpreting the key position. I now know where it is, and things are making sense. I appreciat...bluecap — 04:29 PM
Philco 40-120C Filament Wiring
I think Morzh has a good thought. Check the key position. The under chassis diagram in the Philco info shows an “H” for ...klondike98 — 04:25 PM
Philco 630csx power cord
Yes, the third wire goes to the stud on the side and is separate from the other two. I've usually used cloth covered ...Tynwald — 03:09 PM
New member
Have you tried Alabama Historical Radio Society? They possibly could recommend someone. I remember a name of Dee Hanes...morzh — 03:08 PM
Philco 46-480 Electronic Restoration
Nope, he can’t tell me the dimensions. Looks like I won’t be buying it.jrblasde — 02:38 PM
Philco 46-480 Electronic Restoration
Hello Joseph , It sounds like you found a good seller and yes shipping is really expensive ! Sincerely Richardradiorich — 02:16 PM

[-]
Who's Online
There are currently 4068 online users. [Complete List]
» 1 Member(s) | 4067 Guest(s)
Avatar

>