Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco transitone tropic model 3010-123 schematic
#1

hi every body
first...thanks for allowing me to register in the philco phorum.
i just bought a philco transitone tropic model 3010-123... and being more than 70 years old radio there
is some rust and a lot of dirt.
i looked for a schematic for it but unfortunately i could not find one.
the thing is because of the 70 years old dirt i can not read some of the resistors values and almost all the paper caps. apart from the electrolytic one which original philco.
i would be very grateful if any body can help me with that and since no schematic is available i was thinking
that may be somebody have a better shaped radio and provide me with photos of the radio that might help me to know the values of the caps. and the resistors.
there is something else....i checked radiomuseum.org. and the tubes on that web site seems to be different from what i found in the radio...in my radio the tubes are 12be6,6bj6,35w4,50c1 nad the fifth is not clear
whether its 12av6 or ????? the only visible writing is 12a...
forgive my ignorance but i'm just a hobbyist...thanks again
N.B
a photo of the radio is attached which i found on radiomuseum.org

much obliged
Aras


Attached Files Image(s)
   


Messages In This Thread
philco transitone tropic model 3010-123 schematic - by grundigman3000 - 12-25-2015, 07:58 AM



Users browsing this thread: 7 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Sorry. The test points are as follows: 1 - 0v 2 - 0v 3 - 0v 4 - 12v 5 - 0v 6 - 11.9v 7 - 12v 8 - 12v 9 - 12v...R3Sons — 02:09 PM
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM

[-]
Who's Online
There are currently 5841 online users. [Complete List]
» 2 Member(s) | 5839 Guest(s)
AvatarAvatar

>