philco 48-1283 wiring issue

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

philco 48-1283 wiring issue

Guest
Unregistered

04-24-2009, 05:31 PM

I'm restoring a Philco 48-1283 and having a few issues. I have the schematic ( of the 48-1262) and mods to the 1283,but there are some inconsistencies especially in the actual wiring of the 35L6GT tube. However, I basically just recapped and replaced the resistors. The unit worked before; checked only as a test, so I know the tubes and wiring must have been ok. Now, in radio mode all I get is a hum UNTIL I turn off the power, then for a short few seconds I can clearly hear an AM station. Test points A and C all read high at ~265v, but I've checked the resistors and caps as specified in the diagnoistics. Any help would be appreciated. Icon_sad

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

philco 48-1283 wiring issue - by Guest - 04-24-2009, 05:31 PM

Re: philco 48-1283 wiring issue - by planigan - 04-24-2009, 11:34 PM

Re: philco 48-1283 wiring issue - by Texasrocker - 04-25-2009, 03:52 AM

Re: philco 48-1283 wiring issue - by Guest - 04-25-2009, 10:06 AM

Re: philco 48-1283 wiring issue - by codefox1 - 04-25-2009, 01:23 PM

Re: philco 48-1283 wiring issue - by planigan - 04-25-2009, 08:12 PM

Re: philco 48-1283 wiring issue - by Guest - 04-26-2009, 12:07 AM

Re: philco 48-1283 wiring issue - by planigan - 04-26-2009, 01:36 PM

Re: philco 48-1283 wiring issue - by planigan - 04-26-2009, 01:52 PM

Re: philco 48-1283 wiring issue - by Guest - 04-26-2009, 04:45 PM

Re: philco 48-1283 wiring issue - by planigan - 04-26-2009, 06:47 PM

Re: philco 48-1283 wiring issue - by planigan - 04-26-2009, 11:10 PM

Re: philco 48-1283 wiring issue - by Guest - 05-03-2009, 12:43 AM

Re: philco 48-1283 phono cartridge replacement - by Guest - 05-06-2009, 04:36 PM

Re: philco 48-1283 wiring issue - by Bob - 05-06-2009, 08:41 PM

Re: philco 48-1283 wiring issue - by planigan - 05-08-2009, 01:13 AM

View a Printable Version

Users browsing this thread: 2 Guest(s)

Recent Posts
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM

Who's Online
There are currently no members online.

Login
Username:
Password:	Lost Password?
	Remember me