[onlyrick]

Hello Again
Has anyone changed those two caps on the 37-650 that are under the tuner without
pulling out the tuner unit,when I look and you can,t see much the wire that comes
off the cap the one end you can,t see ,looks like it goes thru the tuner section chassis
and hooks up to the bottom of the tuner and then to the 6A8 tube top cap and the other
one looks like it goes thru thee tuner section chassis as well and hooks to the bottom of
the tuner as well and then goes on to the 6K7 tube top cap,if this is true I could solder
a wire at the bottom of the tuner were it seems the cap wire goes to,the other wire from
the cap seems easy ,one goes to the wafer switch and one to the chassis,these ends are
a lot easier to solder to.I just don't want to tear the whole tuner unit out if I can get
away with it,but I am not sure if those wires really go to the bottom of the tuner,has
anyone pulled out the tuner and if so could you let me know if those two caps hook
up to the bottom of the tuner,I don,t want try and pull it out and end with a radio
that will never work,be thankful for any help here ,all the very best Rick