Philco 19 on/off switch?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Philco 19 on/off switch?

ccomer1955
Senior Member

Posts: 264
Threads: 51
Joined: Aug 2014
City: San Antonio, TX

#1

02-27-2016, 01:13 PM

I'm looking at this Philco 19 cathedral, and it looks to me like the AC line goes to the line filters and on to the power transformer. From there, it seems to go to an on/off switch mounted on the band switch? The volume pot doesn't have a switch on it at all. Looking at the schematic, the volume pot is where I expected to see the on/off switch.

On a side note, the volume pot is seriously stiff. I took it apart and cleaned it up, but it is still stiff. Again, no on/off switch.

NOTE: never mind. I should have known Ron had this information on the site. Thanks Ron. http://www.philcoradio.com/tech/19evol.htm

http://www.nostalgiaair.org/pagesbymodel...013151.pdf

Charlie in San Antonio

(This post was last modified: 02-27-2016, 02:41 PM by ccomer1955.)

Find

« Next Oldest | Next Newest »

Messages In This Thread

Philco 19 on/off switch? - by ccomer1955 - 02-27-2016, 01:13 PM

RE: Philco 19 on/off switch? - by ccomer1955 - 02-27-2016, 01:28 PM

RE: Philco 19 on/off switch? - by markmokris - 02-27-2016, 06:15 PM

RE: Philco 19 on/off switch? - by klondike98 - 02-27-2016, 04:50 PM

RE: Philco 19 on/off switch? - by KCMike - 02-27-2016, 06:27 PM

RE: Philco 19 on/off switch? - by ccomer1955 - 02-27-2016, 10:44 PM

View a Printable Version

Users browsing this thread: 3 Guest(s)

Recent Posts
6TPZ and 5TPO Radio Help
Sorry. The test points are as follows: 1 - 0v 2 - 0v 3 - 0v 4 - 12v 5 - 0v 6 - 11.9v 7 - 12v 8 - 12v 9 - 12v...R3Sons — 02:09 PM
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake :think: ) X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM

Who's Online

There are currently 5795 online users. [Complete List]
» 3 Member(s) | 5792 Guest(s)