1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco-Transitone Auto Radios

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linear Mode
Philco transitone model 802
keith49vj3
Member
***
Posts: 157
Threads: 36
Joined: Dec 2009
City: Johnston, IA
#7

03-19-2016, 05:39 PM
OK guys, I need some advice.  I've never worked on a car radio  is this old.  My first question has to do with this interference filter that I've got shown in the schematic boxed in red and in the attached photo.  It appears to be a coil and 250pf capacitor that I believe is potted in Tar.  I'm not sure if I need to mess with this one or not.  Can I melt off the tar and then replace the cap?  The next question involves the buffer capacitor.  It's a 1250pf capacitor, can I replace it with a 1000pf ceramic cap?  I've ordered a new solid state vibrator for this radio.  My last question regards the polarity of the electrolytic caps.  I've never worked on anything that was positive ground so I need to make sure I've got this right.  Is the negative side of the electrolytics attached to the ground?
Thanks in advance,
Keith


Attached Files Image(s)
       
Find
« Next Oldest | Next Newest »
Thread Closed


Messages In This Thread
Philco transitone model 802 - by keith49vj3 - 03-05-2016, 08:36 PM
RE: Philco transitone model 802 - by sam - 03-05-2016, 09:11 PM
RE: Philco transitone model 802 - by keith49vj3 - 03-06-2016, 08:47 AM
RE: Philco transitone model 802 - by keith49vj3 - 03-06-2016, 08:59 AM
RE: Philco transitone model 802 - by Ron Ramirez - 03-06-2016, 09:05 AM
RE: Philco transitone model 802 - by keith49vj3 - 03-10-2016, 10:20 PM
RE: Philco transitone model 802 - by keith49vj3 - 03-19-2016, 05:39 PM
RE: Philco transitone model 802 - by keith49vj3 - 04-11-2016, 09:39 PM
RE: Philco transitone model 802 - by klondike98 - 04-11-2016, 10:43 PM
RE: Philco transitone model 802 - by George Kirk - 06-01-2016, 08:17 AM
RE: Philco transitone model 802 - by Arran - 12-24-2016, 01:57 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM

[-]
Who's Online
There are currently 6013 online users. [Complete List]
» 1 Member(s) | 6012 Guest(s)
Avatar

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco-Transitone Auto Radios