Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Plastic dial color
#9

Steve D Wrote:I just picked up two Philco's at Renningers, a model 37-610 and model 38-89. My question is about the plastic dial scales. The 38-89 appears very original and a light yellowish color. The 37-610 appears much darker and in one spot (probably left in the dial window over time) almost black. I restored a model 70 back a year ago and the dial scale was closer to the 38-89 in color, but was cracked so I got a reproduction dial from Radio Daze. That dial is very nice but is a much lighter beige color.

My questions are: does anyone know what the color the dials were when new? Does the Radio Daze reproductions come close to the original color, and is there any way to clean or treat the original dials to lighten them?

Thanks,

Steve D

The story I heard is that the only way to clean these was with mineral spirits, water will wash the numbers off almost instantly on most of the 1936-38 dials, I would test anything on an edge of the dial where it can not be seen, like where the part number or alignment marks are.
Best Regards
Arran


Messages In This Thread
Plastic dial color - by Steve D - 05-21-2009, 11:01 AM
Re: Plastic dial color - by exray - 05-21-2009, 11:10 AM
Re: Plastic dial color - by Texasrocker - 05-23-2009, 12:51 AM
Re: Plastic dial color - by AI2V - 05-23-2009, 09:43 AM
Re: Plastic dial color - by Doug Houston - 05-23-2009, 11:41 PM
Re: Plastic dial color - by Texasrocker - 05-24-2009, 06:52 PM
Re: Plastic dial color - by Steve D - 05-25-2009, 07:58 PM
Re: Plastic dial color - by Arran - 05-26-2009, 05:21 PM
Re: Plastic dial color - by Arran - 05-26-2009, 05:26 PM
Re: Plastic dial color - by Guest - 05-27-2009, 02:13 AM
Re: Plastic dial color - by exray - 05-27-2009, 02:41 AM
Re: Plastic dial color - by Arran - 05-28-2009, 02:25 AM
Re: Plastic dial color - by BDM - 05-29-2009, 03:31 AM
Re: Plastic dial color - by Texasrocker - 05-29-2009, 11:31 PM
Re: Plastic dial color - by Arran - 06-03-2009, 12:00 AM
Re: Plastic dial color - by codefox1 - 06-04-2009, 07:04 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM

[-]
Who's Online
There are currently 7717 online users. [Complete List]
» 2 Member(s) | 7715 Guest(s)
AvatarAvatar

>