Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco model 49-1405 added parts not in riders schematic
#1

Hello Everyone,
Just finishing up on that Philco 49-1405 am/phono combo the problem I'm having first off all I removed couple resistors someone had in series
on the rect tube 50 ohms total .
I can't remember the life of me what was doing there it does not show up in the Riders Schematic Also a 330 ohm resistor connected between R100 160 ohm it connected C102B juntion and R202 a 220k ohm What would be the reason for these to resistors Does anyone have this same set or How about the original Philco Schematic .
The last question is I removed a .1 ufd cap I can't figure why it's there either it was placed between the juntion of the on/off control that also leaded to the phono motor .
And the R202 junction again .
Sincerely Rich
P.S. the only either thing is to build antenna for it since it original one had been torn out .
the either reason need to know if some has this same set or can find some one with a 1950 Am tube philco do they have the same antenna circuit design.


http://www.nostalgiaair.org/Resources/646/M0013646.htm


Messages In This Thread



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 4942 online users. [Complete List]
» 2 Member(s) | 4940 Guest(s)
AvatarAvatar

>