Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I don't believe it!
#10

codefox1 Wrote:Some transistorized preamps have an output capacitor that can send a DC charge to the following amplifier, abd sometimes they shorted, and some power amps have no input capacitor that will nullify the defect. So, you can turn the preamp on first, then the amp and not get the thump which can still easily blow out a speaker. You can wire in a capacitor between the input jack of the power amp and it's first stage of amplifiation. And just what value should you use? The answer is "it depends." I would personnally start with an .05 mfd 620 volt and see how it sounds. I assume that both machines have, or have been converted to proper 3 wire grounded recepticles, and the "death capacitors" have been removed. Use crap speakers and resistive loads in parallel when trying out these tests, and let us know what you find.
I'm using a model 7t marantz, and I need to look at the schematics of the amp, but I believe the input dumps into a capacitor. By the way guys, the thump I was hearing, is actually a loud audible AC buzz that instantly went to a hum, then silent. The sound was noticeable at the main electrolytics, and never came through the speakers. Since I changed the caps out with a set from one of my parts rigs, the amp still makes that sound, but not nearly as often. Probably 1 out of every 6 times now. Would it be wise to simply plug it into the wall recept, several times to see if I can figure out if it is the preamp? My preamp has outputs for an osc. which I have one hooked up, and at power up, there is no visable trace on the scope other than the flat line of the sweep. I also had the scope hooked to the numerous amplifier outputs, with no spike or fluctuation of the flat line sweep, again. According the original literature that I got with these amps, the caps are phone company grade. What are the chances of getting replacement caps that have these same characteristics with threaded post's for wire hook up, like the originals? If you have never seen vintage marantz gear, you should treat your eyes. They are real works of art in my opinion, much like the old Philco radios! I'll try to get some photos up here for you all to view.

tractorforum.com *** I reserve the right to be wrong


Messages In This Thread
I don't believe it! - by Music in a bottle - 07-12-2009, 10:22 PM
Re: I don't believe it! - by Texasrocker - 07-13-2009, 03:19 AM
Re: I don't believe it! - by Music in a bottle - 07-13-2009, 02:23 PM
Re: I don't believe it! - by Arran - 07-14-2009, 12:29 AM
Re: I don't believe it! - by kruc - 07-15-2009, 04:02 AM
Re: I don't believe it! - by Texasrocker - 07-16-2009, 03:01 AM
Re: I don't believe it! - by Music in a bottle - 07-19-2009, 05:37 PM
Re: I don't believe it! - by Music in a bottle - 07-19-2009, 05:39 PM
Re: I don't believe it! - by codefox1 - 07-19-2009, 05:54 PM
Re: I don't believe it! - by Music in a bottle - 07-19-2009, 10:37 PM
Re: I don't believe it! - by kruc - 07-20-2009, 05:07 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM

[-]
Who's Online
There are currently 8321 online users. [Complete List]
» 2 Member(s) | 8319 Guest(s)
AvatarAvatar

>