Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 16B restoration
#34

Ordered the pot from Marl, exact same part as for the 118, as I expected. $26 plus shipping. Acceptable.

Ordered stuff from Mouser. I am running thin on some caps and the big dog-bone resistors drifted down, as usual (somehow the big resistors of the main bias divider in all the radios, typically 13-16K and 10K driwt down; mine are 10K and 11K respectively; might work fine but as long as I am at it.....might as well), I bought both 5W rated, this will also help with mounting them as they are longer and won't require wiring.

Oh....the biggest dogbone, the 13K, was loose in the soldering post....the heat, I think. I just yanked it.

I will try to restore the original volume tone-compensated hook-up. The replacement volume pot is obviously larger value, no tap and is bypassed with another resistor to lower the value.

Oh! A heads up - if you buy #46 lamps from Daze, which are about $3.50 there.......they are about $0.60 in Mouser. Since I was ordering stuff in much larger qtys than I need for this project, I also ordered 10 of those.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Philco 16B restoration - by morzh - 07-18-2016, 04:21 PM
RE: Philco 16B restoration - by Radioroslyn - 07-18-2016, 04:47 PM
RE: Philco 16B restoration - by morzh - 07-18-2016, 05:37 PM
RE: Philco 16B restoration - by Radioroslyn - 07-18-2016, 06:53 PM
RE: Philco 16B restoration - by morzh - 07-21-2016, 08:08 PM
RE: Philco 16B restoration - by Ron Ramirez - 07-22-2016, 04:09 PM
RE: Philco 16B restoration - by W2ica - 08-25-2016, 02:15 PM
RE: Philco 16B restoration - by OldRestorer - 07-21-2016, 08:19 PM
RE: Philco 16B restoration - by morzh - 07-21-2016, 09:57 PM
RE: Philco 16B restoration - by morzh - 07-22-2016, 04:10 PM
RE: Philco 16B restoration - by morzh - 07-23-2016, 05:08 PM
RE: Philco 16B restoration - by Ron Ramirez - 07-23-2016, 10:46 PM
RE: Philco 16B restoration - by morzh - 07-24-2016, 02:34 PM
RE: Philco 16B restoration - by morzh - 07-24-2016, 02:36 PM
RE: Philco 16B restoration - by morzh - 07-24-2016, 05:33 PM
RE: Philco 16B restoration - by morzh - 07-25-2016, 09:14 PM
RE: Philco 16B restoration - by KCMike - 07-26-2016, 09:53 AM
RE: Philco 16B restoration - by morzh - 07-26-2016, 10:48 AM
RE: Philco 16B restoration - by Steve Davis - 07-26-2016, 12:28 PM
RE: Philco 16B restoration - by Radioroslyn - 07-26-2016, 12:38 PM
RE: Philco 16B restoration - by KCMike - 07-26-2016, 12:40 PM
RE: Philco 16B restoration - by Ron Ramirez - 07-26-2016, 12:45 PM
RE: Philco 16B restoration - by morzh - 07-26-2016, 01:45 PM
RE: Philco 16B restoration - by Ron Ramirez - 07-26-2016, 02:55 PM
RE: Philco 16B restoration - by morzh - 07-26-2016, 04:02 PM
RE: Philco 16B restoration - by Steve Davis - 07-26-2016, 05:43 PM
RE: Philco 16B restoration - by KCMike - 07-26-2016, 06:04 PM
RE: Philco 16B restoration - by morzh - 07-28-2016, 08:50 PM
RE: Philco 16B restoration - by klondike98 - 07-28-2016, 09:07 PM
RE: Philco 16B restoration - by morzh - 07-31-2016, 02:46 PM
RE: Philco 16B restoration - by KCMike - 07-31-2016, 03:52 PM
RE: Philco 16B restoration - by morzh - 07-31-2016, 04:35 PM
RE: Philco 16B restoration - by morzh - 07-31-2016, 04:46 PM
RE: Philco 16B restoration - by morzh - 07-31-2016, 07:55 PM
RE: Philco 16B restoration - by morzh - 08-02-2016, 04:24 PM
RE: Philco 16B restoration - by klondike98 - 08-02-2016, 04:40 PM
RE: Philco 16B restoration - by morzh - 08-02-2016, 05:00 PM
RE: Philco 16B restoration - by morzh - 08-06-2016, 07:41 PM
RE: Philco 16B restoration - by Ron Ramirez - 08-06-2016, 09:33 PM
RE: Philco 16B restoration - by morzh - 08-06-2016, 10:26 PM
RE: Philco 16B restoration - by W2ica - 08-25-2016, 02:37 PM
RE: Philco 16B restoration - by morzh - 09-23-2016, 04:18 PM
RE: Philco 16B restoration - by morzh - 09-24-2016, 08:14 PM
RE: Philco 16B restoration - by morzh - 10-05-2016, 08:19 PM
RE: Philco 16B restoration - by Arran - 10-06-2016, 01:32 AM
RE: Philco 16B restoration - by morzh - 10-06-2016, 08:55 AM
RE: Philco 16B restoration - by morzh - 10-09-2016, 07:09 PM
RE: Philco 16B restoration - by morzh - 10-11-2016, 08:36 AM
RE: Philco 16B restoration - by morzh - 10-13-2016, 10:53 PM
RE: Philco 16B restoration - by morzh - 10-20-2016, 09:23 PM
RE: Philco 16B restoration - by morzh - 10-22-2016, 12:14 PM
RE: Philco 16B restoration - by KCMike - 10-22-2016, 07:48 PM
RE: Philco 16B restoration - by morzh - 10-22-2016, 08:48 PM
RE: Philco 16B restoration - by KCMike - 10-23-2016, 11:08 AM
RE: Philco 16B restoration - by morzh - 10-23-2016, 01:03 PM
RE: Philco 16B restoration - by morzh - 10-25-2016, 04:12 PM
RE: Philco 16B restoration - by morzh - 11-05-2016, 06:48 PM
RE: Philco 16B restoration - by morzh - 11-06-2016, 05:25 PM
RE: Philco 16B restoration - by morzh - 11-06-2016, 10:12 PM
RE: Philco 16B restoration - by morzh - 11-09-2016, 09:53 AM
RE: Philco 16B restoration - by Ron Ramirez - 11-09-2016, 08:09 PM
RE: Philco 16B restoration - by morzh - 11-09-2016, 10:07 PM
RE: Philco 16B restoration - by morzh - 11-11-2016, 09:04 PM
RE: Philco 16B restoration - by KCMike - 11-11-2016, 09:08 PM
RE: Philco 16B restoration - by morzh - 11-26-2016, 10:57 PM
RE: Philco 16B restoration - by morzh - 11-27-2016, 04:10 PM
RE: Philco 16B restoration - by morzh - 11-30-2016, 10:24 PM
RE: Philco 16B restoration - by KCMike - 11-30-2016, 10:27 PM
RE: Philco 16B restoration - by morzh - 11-30-2016, 10:30 PM
RE: Philco 16B restoration - by morzh - 12-03-2016, 04:21 PM
RE: Philco 16B restoration - by Radioroslyn - 12-03-2016, 04:30 PM
RE: Philco 16B restoration - by morzh - 12-03-2016, 05:17 PM
RE: Philco 16B restoration - by morzh - 12-03-2016, 07:37 PM
RE: Philco 16B restoration - by morzh - 12-22-2016, 11:41 PM
RE: Philco 16B restoration - by morzh - 12-24-2016, 12:21 AM
RE: Philco 16B restoration - by morzh - 12-24-2016, 01:41 PM
RE: Philco 16B restoration - by Ron Ramirez - 12-24-2016, 01:47 PM
RE: Philco 16B restoration - by morzh - 12-24-2016, 03:35 PM
RE: Philco 16B restoration - by Ron Ramirez - 12-24-2016, 03:36 PM



Users browsing this thread: 17 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look!morzh — 02:39 PM
46-1201 Trip Switch Spring
I deleted the other thread, as it was duplicate and did not have the photo. Please proceed with this one.morzh — 02:37 PM
46-1201 Trip Switch Spring
Hello, first post here, bear with me. I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM
An attempt to remove the Field Coil from a G speaker
Mike, give this site a look for your spider. Can't hurt. Take care and BE HEALTHY! -GaryGarySP — 12:41 PM
An attempt to remove the Field Coil from a G speaker
Rod, Bubble packaging? The one I know (if you mean the large bubble type) is really thin. I have some at home. Is there...morzh — 12:23 PM
An attempt to remove the Field Coil from a G speaker
Q8. What's the meaning of life? I have read that someone made a spider out of the clear plastic from bubble packagin...RodB — 11:07 AM
An attempt to remove the Field Coil from a G speaker
So, Q1. Does anyone know where to get the spider. Q2. If there is no such place, what material is best? I doubt tin is...morzh — 09:43 PM
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM

[-]
Who's Online
There are currently no members online.

>