[Solamar]

   

Here's the bottom picture.  As far as I can tell it's original except for the newer power cord.

I did notice that IF tube (should be a 78 per schematics) has been swapped for a 77.  Was that a running change or did someone put the wrong tube in?

I have sourced and ordered some Philco e-cap cans as well as new caps to stuff them with.  I have heard conflicting info as to weather the e-cap cans should be insulated from the chassis (cardboard tube).  I have read both, one or neither   The schematic looks like the cans are not grounded to the chassis.