Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco model 77
#3

 The speaker is correct, my model 96 has one as well, the standard console speaker in use in the 1929-31 models was the Model H speaker. As for why it does not play these sets pretty well need all the capacitors replaced, many of the resistors too. One think to check for is if the audio output transformer is open, each leg of the primary should be connected to the plate pins of the #45 tubes. It could also be an open audio interstage transformer, though that often results in low volume and not a dead radio. Have you tried connecting the antenna lead to the grid caps of each of the #24 tubes? Sometimes one or more of the RF coils can go open, so if one coil is bad between the antenna and the following stage the radio might not pick up anything. Fortunately the RF coils are single layered so they should be easy to repair if they are open.
Regards
Arran


Messages In This Thread
Philco model 77 - by flatheadjr - 09-14-2016, 10:24 PM
RE: Philco model 77 - by flatheadjr - 09-14-2016, 10:25 PM
RE: Philco model 77 - by Arran - 09-16-2016, 03:17 AM
RE: Philco model 77 - by flatheadjr - 09-16-2016, 09:52 PM
RE: Philco model 77 - by Arran - 09-17-2016, 03:50 AM
RE: Philco model 77 - by flatheadjr - 09-17-2016, 08:25 PM
RE: Philco model 77 - by Radioroslyn - 09-17-2016, 09:21 PM
RE: Philco model 77 - by flatheadjr - 09-17-2016, 09:38 PM
RE: Philco model 77 - by Radioroslyn - 09-18-2016, 12:08 AM
RE: Philco model 77 - by flatheadjr - 09-18-2016, 12:47 AM
RE: Philco model 77 - by Radioroslyn - 09-18-2016, 02:52 PM
RE: Philco model 77 - by flatheadjr - 09-18-2016, 04:12 PM
RE: Philco model 77 - by Radioroslyn - 09-18-2016, 04:46 PM
RE: Philco model 77 - by flatheadjr - 09-18-2016, 06:11 PM
RE: Philco model 77 - by Radioroslyn - 09-18-2016, 07:37 PM
RE: Philco model 77 - by flatheadjr - 09-18-2016, 08:56 PM
RE: Philco model 77 - by Radioroslyn - 09-18-2016, 11:56 PM
RE: Philco model 77 - by flatheadjr - 09-19-2016, 12:20 PM
RE: Philco model 77 - by Radioroslyn - 09-19-2016, 01:09 PM
RE: Philco model 77 - by klondike98 - 09-19-2016, 03:01 PM
RE: Philco model 77 - by flatheadjr - 09-20-2016, 09:52 AM
RE: Philco model 77 - by flatheadjr - 09-20-2016, 11:25 PM
RE: Philco model 77 - by flatheadjr - 01-11-2017, 09:14 PM
RE: Philco model 77 - by Ron Ramirez - 01-11-2017, 09:55 PM



Users browsing this thread: 8 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look!morzh — 02:39 PM
46-1201 Trip Switch Spring
I deleted the other thread, as it was duplicate and did not have the photo. Please proceed with this one.morzh — 02:37 PM
46-1201 Trip Switch Spring
Hello, first post here, bear with me. I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM
An attempt to remove the Field Coil from a G speaker
Mike, give this site a look for your spider. Can't hurt. Take care and BE HEALTHY! -GaryGarySP — 12:41 PM
An attempt to remove the Field Coil from a G speaker
Rod, Bubble packaging? The one I know (if you mean the large bubble type) is really thin. I have some at home. Is there...morzh — 12:23 PM
An attempt to remove the Field Coil from a G speaker
Q8. What's the meaning of life? I have read that someone made a spider out of the clear plastic from bubble packagin...RodB — 11:07 AM
An attempt to remove the Field Coil from a G speaker
So, Q1. Does anyone know where to get the spider. Q2. If there is no such place, what material is best? I doubt tin is...morzh — 09:43 PM
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM

[-]
Who's Online
There are currently 8496 online users. [Complete List]
» 1 Member(s) | 8495 Guest(s)
Avatar

>