Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco model 87
#4

(09-29-2016, 12:17 PM)flatheadjr Wrote:  Other than the cable being broken on the tuner everything else checks out. Unfortunately some has done some work on this thing, they replaced the electrolytics a long time ago but did it outside the metal box full of capacitors. As soon as I repair the tuner I'll have to see whats happens. I'll have to order the caps for this to repair it right.

  These sets didn't use electrolytics originally, they used a series of large paper caps and chokes for filtering in the power supply. The original paper caps are inside that can and were probably bypassed by the electrolytics, hopefully because the old caps were open and not shorted. In any event you can use modern polyester film caps as replacements for the paper caps inside the can. Apparently Philco liked to line their condenser cans with fish paper so it isn't too hard to remove the contents if you want to rebuild the can.
Regards
Arran


Messages In This Thread
Philco model 87 - by flatheadjr - 09-28-2016, 09:27 PM
RE: Philco model 87 - by flatheadjr - 01-11-2017, 09:24 PM
RE: Philco model 87 - by flatheadjr - 01-21-2017, 04:40 PM
RE: Philco model 87 - by Radioroslyn - 01-21-2017, 07:44 PM
RE: Philco model 87 - by Mondial - 01-21-2017, 09:34 PM
RE: Philco model 87 - by flatheadjr - 01-21-2017, 09:52 PM
RE: Philco model 87 - by Radioroslyn - 01-22-2017, 12:07 AM
RE: Philco model 87 - by flatheadjr - 01-22-2017, 12:30 AM
RE: Philco model 87 - by Radioroslyn - 01-22-2017, 07:10 AM
RE: Philco model 87 - by flatheadjr - 01-22-2017, 02:16 PM
RE: Philco model 87 - by Radioroslyn - 01-22-2017, 03:11 PM
RE: Philco model 87 - by flatheadjr - 01-22-2017, 03:48 PM
RE: Philco model 87 - by Radioroslyn - 01-23-2017, 01:25 AM
RE: Philco model 87 - by flatheadjr - 01-23-2017, 01:37 AM
RE: Philco model 87 - by Radioroslyn - 01-23-2017, 01:11 PM
RE: Philco model 77 - by Radioroslyn - 09-29-2016, 10:29 AM
RE: Philco model 77 - by flatheadjr - 09-29-2016, 12:17 PM
RE: Philco model 77 - by Arran - 10-01-2016, 05:00 AM
RE: Philco model 77 - by flatheadjr - 10-08-2016, 06:22 PM
RE: Philco model 77 - by Radioroslyn - 10-08-2016, 08:05 PM
RE: Philco model 77 - by flatheadjr - 10-12-2016, 09:31 PM
RE: Philco model 77 - by Radioroslyn - 10-12-2016, 10:35 PM
RE: Philco model 77 - by Radioroslyn - 10-17-2016, 08:05 PM
RE: Philco model 77 - by flatheadjr - 01-04-2017, 11:08 PM
RE: Philco model 77 - by Radioroslyn - 01-05-2017, 10:30 AM
RE: Philco model 77 - by flatheadjr - 01-05-2017, 09:46 PM
RE: Philco model 77 - by Arran - 01-09-2017, 04:02 AM
RE: Philco model 77 - by Radioroslyn - 01-09-2017, 11:42 AM
RE: Philco model 77 - by flatheadjr - 01-11-2017, 12:03 AM
RE: Philco model 77 - by Ron Ramirez - 01-11-2017, 01:20 PM
RE: Philco model 77 - by Radioroslyn - 01-11-2017, 09:03 AM



Users browsing this thread: 9 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look!morzh — 02:39 PM
46-1201 Trip Switch Spring
I deleted the other thread, as it was duplicate and did not have the photo. Please proceed with this one.morzh — 02:37 PM
46-1201 Trip Switch Spring
Hello, first post here, bear with me. I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM
An attempt to remove the Field Coil from a G speaker
Mike, give this site a look for your spider. Can't hurt. Take care and BE HEALTHY! -GaryGarySP — 12:41 PM
An attempt to remove the Field Coil from a G speaker
Rod, Bubble packaging? The one I know (if you mean the large bubble type) is really thin. I have some at home. Is there...morzh — 12:23 PM
An attempt to remove the Field Coil from a G speaker
Q8. What's the meaning of life? I have read that someone made a spider out of the clear plastic from bubble packagin...RodB — 11:07 AM
An attempt to remove the Field Coil from a G speaker
So, Q1. Does anyone know where to get the spider. Q2. If there is no such place, what material is best? I doubt tin is...morzh — 09:43 PM
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM

[-]
Who's Online
There are currently 8466 online users. [Complete List]
» 1 Member(s) | 8465 Guest(s)
Avatar

>