09-14-2009, 02:18 PM
When these sets were built, they did not receive several coats of lacquer; only a few.
To duplicate the original factory finish, wood grain filler should be used first to fill the pores of the wood. It should be either the same color as the toned finish, or a clear grain sealer such as Crystalac Sanding Sealer. Do not use the neutral color wood putties!
Then spray on just enough toning lacquer to achieve the desired color, without using too many coats. If you are using a pigment type of toner, too many coats will hide the grain of the wood, giving it a painted look that is undesirable.
After the cabinet is toned and dry, then apply your decals. Don't apply the decals before the toner - the toner will partially obscure the decals.
Finish up with a few coats of clear lacquer.
To duplicate the original factory finish, wood grain filler should be used first to fill the pores of the wood. It should be either the same color as the toned finish, or a clear grain sealer such as Crystalac Sanding Sealer. Do not use the neutral color wood putties!
Then spray on just enough toning lacquer to achieve the desired color, without using too many coats. If you are using a pigment type of toner, too many coats will hide the grain of the wood, giving it a painted look that is undesirable.
After the cabinet is toned and dry, then apply your decals. Don't apply the decals before the toner - the toner will partially obscure the decals.
Finish up with a few coats of clear lacquer.
--
Ron Ramirez
Ferdinand IN
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
