01-16-2017, 10:58 PM
With all the lousy weather, and some sleep, I found some time to advance on the kit. I worked on the "signal wiring" part. I had a PC board to mount the level control on, then had to figure out the combination. I thought I had it documented fairly well, but still had to make some corrections. Took a couple try's to get all the wires pointed in the correct direction, and make everything line up. I think I finally succeeded. This resembled a Chinese jigsaw puzzle 
Here is the rest of the signal wiring. This part was very straightforward and went smoothly. Looks like this circuit uses several different feedback loops. I didn't have enough shielded cable to go from the level control board to the tube terminal. But, according to the pic I have, they just ran a single wire to each tube, so that's what I did.
Here is the rest of the signal wiring. This part was very straightforward and went smoothly. Looks like this circuit uses several different feedback loops. I didn't have enough shielded cable to go from the level control board to the tube terminal. But, according to the pic I have, they just ran a single wire to each tube, so that's what I did.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
