Zenith 10-H-571 "Spinet"

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Zenith 10-H-571 "Spinet"

morzh
Odobenus rosmarus

Posts: 16,273
Threads: 566
Joined: Oct 2011
City: Jackson State, Province, Country: NJ

#80

03-14-2017, 06:57 PM

Thanks John, thanks everyone.

Tonight I used my "time off" to open and clean the volume control and the power switch. The switch was working but was a bit dirty.
Volume had lapses and scratching.
I opened it, no small doing, the resistor has 6 lugs, and the face plate on one side had the tabs soldered to it. The resistor itself is cylindrical, not flat, and very, very narrow.
As usual, Deoxit spay, then a little dab of Deoxit/Lithium grease. Now it is quiet and seems to have no lapses.

Question: who knows what belt should there be to drive the pulley that drives the tunng cap from the knurled cylinder attached to the flywheel? I have a rope with ends tied together as a large nod. It is loose. I wonder if it s original or should there be a belt?

KCMike, could you possibly look in yours?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 07:54 PM

RE: Zenith 10-H-571 "Spinet" - by sam - 01-07-2017, 07:58 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 08:18 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 01-07-2017, 08:47 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 09:34 PM

RE: Zenith 10-H-571 "Spinet" - by Paul Philco322 - 01-07-2017, 10:30 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-07-2017, 10:55 PM

RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-08-2017, 12:14 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 12:27 AM

RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-08-2017, 01:14 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 10:53 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 08:55 PM

RE: Zenith 10-H-571 "Spinet" - by Kenneth F. Besso Jr. - 01-08-2017, 09:10 PM

RE: Zenith 10-H-571 "Spinet" - by Kenneth F. Besso Jr. - 01-08-2017, 09:14 PM

RE: Zenith 10-H-571 "Spinet" - by Kenneth F. Besso Jr. - 01-08-2017, 09:23 PM

RE: Zenith 10-H-571 "Spinet" - by Nathan Slingerland - 01-08-2017, 09:24 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 09:34 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 09:54 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 09:55 PM

RE: Zenith 10-H-571 "Spinet" - by Nathan Slingerland - 01-08-2017, 10:26 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 10:34 PM

RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-08-2017, 11:22 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-08-2017, 11:35 PM

RE: Zenith 10-H-571 "Spinet" - by Arran - 01-09-2017, 05:23 AM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 01-08-2017, 11:48 PM

RE: Zenith 10-H-571 "Spinet" - by Jayce - 01-09-2017, 01:36 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-09-2017, 09:37 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-10-2017, 10:04 AM

RE: Zenith 10-H-571 "Spinet" - by Arran - 01-13-2017, 01:12 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-11-2017, 12:13 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-11-2017, 04:28 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-12-2017, 11:24 AM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 01-12-2017, 12:58 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-12-2017, 06:06 PM

RE: Zenith 10-H-571 "Spinet" - by TV MAN - 01-12-2017, 06:58 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-12-2017, 11:20 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-13-2017, 10:22 AM

RE: Zenith 10-H-571 "Spinet" - by Arran - 01-14-2017, 03:45 AM

RE: Zenith 10-H-571 "Spinet" - by Phlogiston - 01-13-2017, 12:18 PM

RE: Zenith 10-H-571 "Spinet" - by Mondial - 01-14-2017, 01:47 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-14-2017, 08:15 PM

RE: Zenith 10-H-571 "Spinet" - by Paul Philco322 - 01-14-2017, 10:11 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-14-2017, 10:46 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-23-2017, 10:04 AM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 01-23-2017, 10:59 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-23-2017, 11:12 AM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 01-23-2017, 08:54 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-23-2017, 10:01 PM

RE: Zenith 10-H-571 "Spinet" - by Phlogiston - 01-26-2017, 01:30 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-26-2017, 03:14 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 01-27-2017, 07:14 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-11-2017, 10:43 PM

RE: Zenith 10-H-571 "Spinet" - by Mondial - 02-12-2017, 03:15 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-12-2017, 09:22 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 02-12-2017, 09:48 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-12-2017, 10:30 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 02-12-2017, 11:00 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 02-24-2017, 01:16 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-24-2017, 02:27 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-26-2017, 11:39 PM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 02-27-2017, 12:43 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-27-2017, 01:30 PM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 02-27-2017, 03:02 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-27-2017, 03:39 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 02-27-2017, 05:19 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-06-2017, 12:28 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-11-2017, 05:04 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-11-2017, 05:30 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-11-2017, 06:23 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-11-2017, 10:54 PM

RE: Zenith 10-H-571 "Spinet" - by klondike98 - 03-11-2017, 11:02 PM

RE: Zenith 10-H-571 "Spinet" - by Nathan Slingerland - 03-12-2017, 01:45 PM

RE: Zenith 10-H-571 "Spinet" - by OldRestorer - 03-12-2017, 07:39 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-12-2017, 08:41 PM

RE: Zenith 10-H-571 "Spinet" - by OldRestorer - 03-12-2017, 09:04 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-12-2017, 11:03 PM

RE: Zenith 10-H-571 "Spinet" - by Arran - 03-13-2017, 12:26 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-13-2017, 10:30 AM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-14-2017, 11:59 AM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-14-2017, 06:57 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-14-2017, 08:29 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-14-2017, 08:36 PM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-14-2017, 08:42 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-14-2017, 08:46 PM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-14-2017, 08:56 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-14-2017, 09:45 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-14-2017, 10:40 PM

RE: Zenith 10-H-571 "Spinet" - by OldRestorer - 03-15-2017, 08:04 AM

RE: Zenith 10-H-571 "Spinet" - by Eliot Ness - 03-15-2017, 12:02 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-15-2017, 08:16 AM

RE: Zenith 10-H-571 "Spinet" - by Kenneth F. Besso Jr. - 03-15-2017, 07:34 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-15-2017, 07:43 PM

RE: Zenith 10-H-571 "Spinet" - by Kenneth F. Besso Jr. - 03-15-2017, 07:50 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-19-2017, 09:53 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-20-2017, 11:11 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-25-2017, 05:57 PM

RE: Zenith 10-H-571 "Spinet" - by Arran - 03-26-2017, 10:46 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-25-2017, 07:21 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-25-2017, 09:31 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-25-2017, 09:44 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-25-2017, 10:28 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 01:51 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-26-2017, 07:50 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 08:57 PM

RE: Zenith 10-H-571 "Spinet" - by KCMike - 03-26-2017, 10:06 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 10:15 PM

RE: Zenith 10-H-571 "Spinet" - by morzh - 03-26-2017, 11:14 PM

View a Printable Version

Users browsing this thread: 16 Guest(s)

Recent Posts
An attempt to remove the Field Coil from a G speaker
Gary I in fact did, on a 38-14, I think, where I had a speaker with the dead coil. Well...it kinda worked. Kinda, be...morzh — 10:38 PM
An attempt to remove the Field Coil from a G speaker
Mike, what ever happened to that plan you had to try using a rare earth magnet to magnetize the pole? This looks like a...GarySP — 10:25 PM
RCA T62 is playing.....
Beautiful set.morzh — 09:07 PM
An attempt to remove the Field Coil from a G speaker
Well....here it is. The green stuff. Unfortunately, probably penetrates deep. I opened the top layer and saw that: ...morzh — 08:58 PM
Philco 91 Restore Code ??
:clap: :clap: :clap: :clap: Really nice workmanship!!! Top of the chassis looks great. Sorry about the long winded e...MrFixr55 — 08:09 PM
Philco 40-120C Restoration
Thank you for your reply. I will check voltages on the other tubes, look at resistor 23 and cap 25, etc. If all else fai...bluecap — 07:58 PM
RCA T62 is playing.....
Nice looking set great save. DavidDavid — 07:48 PM
Philco 89 indicator light.
Hello Jim, I have done several 89s. The trick is to move the drum in or out on it's shaft. You will need to loosen a set...dconant — 07:36 PM
An attempt to remove the Field Coil from a G speaker
MrFixr Yes, it is my plan to go with 45rpm spider if I go that far. No, the pole was not left-handed as I unscrewed ...morzh — 07:14 PM
Philco 40-120C Restoration
Change the tube. Check the tube's bias network. Are any other tubes experience the drop or just this?` Is resistor 23 OK...morzh — 07:09 PM

Who's Online

There are currently 6671 online users. [Complete List]
» 1 Member(s) | 6670 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me