Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Stromberg Carlson model 60
#2

It also looks like most of the original tubular paper caps are still in it, the numbered brown paper ones with the black tar in the ends, which makes this set a good candidate for restuffing. One good thing about Stromberg Carlson models is if you can find a copy of a factory service folder, and a parts list, they are much like a G.E or RCA set in that they were very well documented with detailed diagrams of parts placement both above and bellow the chassis.
Regards
Arran

P.S By luck Nostalgia Air seems to have the factory folder uploaded and not the Readers Digest style service info from the Riders manuals. http://www.nostalgiaair.org/pagesbymodel...021588.pdf


Messages In This Thread
Stromberg Carlson model 60 - by KCMike - 04-02-2017, 07:05 PM
RE: Stromberg Carlson model 60 - by Arran - 04-03-2017, 04:05 AM
RE: Stromberg Carlson model 60 - by KCMike - 04-03-2017, 01:40 PM
RE: Stromberg Carlson model 60 - by Radioroslyn - 04-04-2017, 06:03 AM
RE: Stromberg Carlson model 60 - by Arran - 04-04-2017, 10:47 PM
RE: Stromberg Carlson model 60 - by KCMike - 04-05-2017, 05:11 PM
RE: Stromberg Carlson model 60 - by KCMike - 04-08-2017, 01:15 PM
RE: Stromberg Carlson model 60 - by Joe Rossi - 04-09-2017, 08:46 PM
RE: Stromberg Carlson model 60 - by KCMike - 04-10-2017, 09:58 AM
RE: Stromberg Carlson model 60 - by Eric - 06-06-2018, 09:20 AM
RE: Stromberg Carlson model 60 - by KCMike - 06-06-2018, 12:18 PM
RE: Stromberg Carlson model 60 - by Eric - 06-06-2018, 07:25 PM
RE: Stromberg Carlson model 60 - by Eric - 06-14-2018, 04:12 PM
RE: Stromberg Carlson model 60 - by KCMike - 06-14-2018, 04:37 PM
RE: Stromberg Carlson model 60 - by Eric - 06-14-2018, 05:53 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM

[-]
Who's Online
There are currently 7695 online users. [Complete List]
» 2 Member(s) | 7693 Guest(s)
AvatarAvatar

>