46-1226 code 125 restoratioin *DONE
Posts: 1,114
Threads: 14
Joined: Feb 2013
City: Irvington, NY
Do not be so concerned with the voltage on pin 3 of the 6K6 tubes. It can go to 315 V or more safely. What is really important is the voltage on pin 4, which is the screen grid. If the voltage on pin 4 is around 250 V or less then you are fine.
Check this voltage on pin 4 as I believe there is a dropping resistor which reduces the voltage to it. It appears Philco ran a higher voltage on pin 3 but reduced it on pin 4 so the tubes operated within there ratings.
Any power resistor that is not heat sinked to the chassis will get too hot to touch. They will reach several hundred degrees at their rated power and is perfectly normal.
Messages In This Thread
RE: 46-1226 code 125 restoratioin - by Mondial - 05-06-2017, 02:25 PM
Users browsing this thread: 49 Guest(s)
|
Recent Posts
|
Philco model 60
|
Welcome to the Phorum, Radios1340! The oscillator coil on the 60 is a common culprit. I just bought a 60B (June 1934) ...GarySP — 02:33 PM |
Philco model 60
|
Yes, standard alignment procedure. I can get the minuscule tone to vary when adjusting the trimmers. But you almost have...Radios1340 — 01:40 PM |
A Marconi model 86
|
An imposing-looking radio, for sure.morzh — 12:43 PM |
Philco model 60
|
Model 60 struck again :lol:
Welcome to the Phorum!
Above is the article on Model 60. Could be of some use.
Now...morzh — 12:38 PM |
A Marconi model 86
|
Ooh, very nice!jrblasde — 12:19 PM |
A Marconi model 86
|
I am picking up this radio today. The seller tells me it is all there and working.including the tuning eye.
It has 13 tu...Dan Walker — 12:07 PM |
Philco model 60
|
Hi guys! I’m a new member here but have been using your resources for quite some time. Hopefully I can get some help wit...Radios1340 — 11:52 AM |
An attempt to remove the Field Coil from a G speaker
|
Milkjug plastic?morzh — 09:36 PM |
An attempt to remove the Field Coil from a G speaker
|
Yep.
'Cause when I heard "buibble" I immediately thought of this
and started wondering how this poly...morzh — 09:33 PM |
An attempt to remove the Field Coil from a G speaker
|
Blister Pack, that's what I was trying to remember!RodB — 09:29 PM |
Who's Online
|
There are currently 7580 online users. [Complete List] » 2 Member(s) | 7578 Guest(s)
|
|
|

|