Posts: 16,310
Threads: 569
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Speaker unplugged....always a bad idea if tested with rectifier in. Never ever do that again (and yes it is the same as having your field open).
Although in 20s case it is not as bad, in some others it could be really bad.
Speaker should be in, and the integrity of output xfmr and the field coil should be confirmed first.
So should be confirmed the absence of shorts across the filaments and B+ voltage lest your radio goes up in smoke.
And.....before following some guy on youtube, you are better off asking here. At least we will try to make you understand your actions and the possible consequences; youtube won't do it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Messages In This Thread
RE: Philco Model 20 Lowboy - by morzh - 05-13-2017, 06:44 PM
Users browsing this thread: 30 Guest(s)
|
Recent Posts
|
91H Code 126 Restore
|
When it comes to the cloth covered power cords, if they are not frayed, and are flexible, and if I can bend one without ...Arran — 06:21 PM |
An attempt to remove the Field Coil from a G speaker
|
Could be. The central cylinder is OK, but the sides are...well. What's done is done.
I wonder if some standard bobbine w...morzh — 06:02 PM |
An attempt to remove the Field Coil from a G speaker
|
Mike;
As I was saying it doesn't look like they used much of a bobbin for the field coil, not like a Magnavox one wou...Arran — 05:49 PM |
Atwater-Kent 84, restoration.
|
This AK84 was bought, I think, last fall.
For a whopping $100.
It has been, according to the seller, restored.
As I go ...morzh — 05:48 PM |
Philco model 60
|
Plus I forgot that I have a spare complete Philco FC speaker, that would work perfectly, now that I don’t need it. Got i...Radios1340 — 05:36 PM |
Philco model 60
|
Duh! I guess I can’t read an ohm meter today. I took the oscillator coil out and will take some readings tomorrow.Radios1340 — 05:30 PM |
An attempt to remove the Field Coil from a G speaker
|
Well, I killed the coil.
Tried to get to the end of that oxidated spot, but while holding the coil in hand, i let it sl...morzh — 05:27 PM |
91H Code 126 Restore
|
It does not require taking apart.
Find an opening, any gap that would lead inside, where the resistive element and the ...morzh — 04:59 PM |
Philco 70 antenna lead
|
I agree. From the ones I've worked on its always been that green corrosion that causes the coils to open.Jim Dutridge — 04:34 PM |
91H Code 126 Restore
|
Well I'm making good progress.
All the bakelite blocks have been recapped. I found that using a heat gun and skinny ...RealRider — 02:35 PM |
Who's Online
|
There are currently 4970 online users. [Complete List] » 2 Member(s) | 4968 Guest(s)
|
|
|

|