11-17-2017, 08:01 PM
>any resistors that should specifically be over 1/2 watt?
#'s 61, 60, 67,and 68. 60 is a large wire wound job which acts as a bleeder for the power supply. Arran seems to have poor luck w/them being open, me not so much. 6K @ abt 20w.
61 has several sections in series. If it is a candohm style check for resistance and shorts to the chassis. Wattage between the section varies generally the lower the resistance the lower the wattage. Would take a guess and say that the largest would be abt 10w.
67 and 68 could be 1w or so.
This is with a quick look at the diagram .
#'s 61, 60, 67,and 68. 60 is a large wire wound job which acts as a bleeder for the power supply. Arran seems to have poor luck w/them being open, me not so much. 6K @ abt 20w.
61 has several sections in series. If it is a candohm style check for resistance and shorts to the chassis. Wattage between the section varies generally the lower the resistance the lower the wattage. Would take a guess and say that the largest would be abt 10w.
67 and 68 could be 1w or so.
This is with a quick look at the diagram .
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
