Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Fisher 500c rebuild
#2

Tim - this should be a great thread!

The guys over at AK have stated that (what they call) the brown "dog turd" caps should always be replaced. Apparently they aren't as good as Orange Drops. Now, I have used yellow film as well as the hard case burgundy film caps from Mouser, which look like Chiclets (does anyone remember those?) to replace dog turd, clear, and EROFOL caps. I think I used all yellow film in my TA-600 and I'm quite pleased with its sound, even though the FM is Living Mono (no FM multiplex standard in 1959-60).

By "yellow film" caps, I mean the very same yellow film caps that many of us use in our vintage Philcos. I did not try to listen to my TA-600 prior to recapping it, but I have tried out a couple of my Fisher tuners prior to recapping and honestly, I can't tell the difference between old EROFOL and new yellow film or Chiclet caps. That tube Fisher sound comes shining through every time... Icon_thumbup

Ordinarily we try not to send anyone to other forums, simply because folks come here for the answers and we try to provide them when we can. In this case, however, I strongly suggest that you spend some time over at AudioKarma in the Fisher section, studying the IBAM and IBBA modifications. You should choose one or the other, and incorporate it into your 500C restore. Either circuit will allow you to properly setup the bias of the 7591A output tubes, prolonging their life. Your Fisher will thank you.

Then, of course, come back here and incorporate your added knowledge into this thread. Icon_smile

There are a few "dog turds" in the multiplex decoder that will require replacement. The MPX decoder also has a 1 uF electrolytic which should be replaced with a 1 uF, 350 or 400V film cap. The film cap is much larger, yes, but will last much longer.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Fisher 500c rebuild - by TV MAN - 01-29-2018, 05:35 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 01-29-2018, 07:53 PM
RE: Fisher 500c rebuild - by Arran - 01-30-2018, 03:41 AM
RE: Fisher 500c rebuild - by Ron Ramirez - 01-30-2018, 07:05 AM
RE: Fisher 500c rebuild - by TV MAN - 02-01-2018, 03:56 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-01-2018, 04:27 PM
RE: Fisher 500c rebuild - by TV MAN - 02-01-2018, 05:28 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-01-2018, 07:15 PM
RE: Fisher 500c rebuild - by TV MAN - 02-02-2018, 09:08 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-02-2018, 11:12 PM
RE: Fisher 500c rebuild - by Arran - 02-03-2018, 05:15 AM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-03-2018, 10:04 AM
RE: Fisher 500c rebuild - by TV MAN - 02-03-2018, 11:28 AM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-03-2018, 08:01 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-03-2018, 08:14 PM
RE: Fisher 500c rebuild - by Arran - 02-05-2018, 04:06 AM
RE: Fisher 500c rebuild - by TV MAN - 02-05-2018, 11:29 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-07-2018, 12:53 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-07-2018, 01:46 PM
RE: Fisher 500c rebuild - by Arran - 02-09-2018, 04:09 AM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-09-2018, 07:22 AM
RE: Fisher 500c rebuild - by TV MAN - 02-10-2018, 01:34 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-10-2018, 07:30 PM
RE: Fisher 500c rebuild - by Arran - 02-11-2018, 03:29 AM
RE: Fisher 500c rebuild - by Phlogiston - 02-11-2018, 01:20 PM
RE: Fisher 500c rebuild - by Phlogiston - 02-11-2018, 01:39 PM
RE: Fisher 500c rebuild - by Arran - 02-12-2018, 03:04 AM
RE: Fisher 500c rebuild - by Ron Ramirez - 02-12-2018, 07:28 AM
RE: Fisher 500c rebuild - by TV MAN - 02-15-2018, 02:18 PM
RE: Fisher 500c rebuild - by TV MAN - 03-01-2018, 11:35 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 03-02-2018, 07:20 AM
RE: Fisher 500c rebuild - by morzh - 03-02-2018, 10:53 AM
RE: Fisher 500c rebuild - by Phlogiston - 03-02-2018, 01:06 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 03-02-2018, 04:01 PM
RE: Fisher 500c rebuild - by TV MAN - 03-10-2018, 11:13 AM
RE: Fisher 500c rebuild - by Ron Ramirez - 03-11-2018, 12:36 AM
RE: Fisher 500c rebuild - by TV MAN - 03-21-2018, 10:23 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 03-22-2018, 06:14 AM
RE: Fisher 500c rebuild - by TV MAN - 03-22-2018, 06:36 PM
RE: Fisher 500c rebuild - by TV MAN - 04-07-2018, 12:25 PM
RE: Fisher 500c rebuild - by Ron Ramirez - 04-11-2018, 10:15 AM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM
B&K 1077B no video
Thanks Rich! I'll take a look and see what he has. I know there's more modern equipment to be had, but this one I know a...TV MAN — 09:11 PM
B&K 1077B no video
Hello Tim, Here is a link to restoration of one on Phil's old radios site ! Sincerely Richard bk1077bradiorich — 09:01 PM
6TPZ and 5TPO Radio Help
I'm a little befuddled on this one. Should X5 and X4 be tied together like this?  It looks like someone added this at so...R3Sons — 07:33 PM

[-]
Who's Online
There are currently no members online.

>