1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Home Radios

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linear Mode
Help identifying a philco model
elfiself
Member
***
Posts: 58
Threads: 9
Joined: Apr 2016
City: Albany,NY
#13

03-14-2018, 08:59 AM
Question on radio continues.  Seems most 42-PT12 have plastic case.  The model I have has a wood cabinet I feel is original as the aerial loop is mounted on a paper strip which was stapled on the back interior of the cabinet.  Please see attachments.  I removed the chassis w/aerial cabinet is very rough and in pieces.
elfiself
as a side note 42-PT -10 schematic shows 2 7C6 tubes, PT12 schematic shows 1 7C6 and 1 7C7. This radio has 1 7C6 and 1 7C7


Attached Files Image(s)
       
(This post was last modified: 03-14-2018, 09:16 AM by elfiself. Edit Reason: Addditional info )
Find
« Next Oldest | Next Newest »
Thread Closed


Messages In This Thread
Help identifying a philco model - by elfiself - 03-12-2018, 03:25 PM
RE: Help identifying a philco model - by elfiself - 03-12-2018, 06:46 PM
RE: Help identifying a philco model - by elfiself - 03-12-2018, 07:16 PM
RE: Help identifying a philco model - by elfiself - 03-12-2018, 07:23 PM
RE: Help identifying a philco model - by elfiself - 03-13-2018, 06:56 PM
RE: Help identifying a philco model - by elfiself - 03-13-2018, 09:17 PM
RE: Help identifying a philco model - by elfiself - 03-14-2018, 08:59 AM
RE: Help identifying a philco model - by elfiself - 03-14-2018, 11:03 AM
RE: Help identifying a philco model - by elfiself - 03-14-2018, 01:29 PM
RE: Help identifying a philco model - by elfiself - 03-14-2018, 04:25 PM
RE: Help identifying a philco model - by elfiself - 03-14-2018, 05:54 PM



Users browsing this thread:
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 9604 online users. [Complete List]
» 3 Member(s) | 9601 Guest(s)
AvatarAvatarAvatar

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Home Radios