Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 9S232 sensitivity control
#9

I’m glad you are making progress. If you find that you need a true replacement RF choke let me know. I might have one.

One other thing I’ve found with the last couple of Zeniths I’ve worked on is bad mica caps. I’ve had intermittent coupling caps, maybe someone rotated them years ago, and the plate bypass cap in the audio section. Yours would be C12 the 500 PF unit. When these leak, the audio starts to lack highs. Just something to keep in mind.

I know you’ll really enjoy this radio. Even though it has a single ended output section, it will rock the house.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”


Messages In This Thread
RE: Zenith 9S232 sensitivity control - by tbone - 06-18-2018, 12:05 PM
RE: Zenith 9S232 sensitivity control - by tbone - 06-18-2018, 09:18 PM
RE: Zenith 9S232 sensitivity control - by morzh - 06-18-2018, 10:17 PM
RE: Zenith 9S232 sensitivity control - by tbone - 06-19-2018, 05:01 AM
RE: Zenith 9S232 sensitivity control - by tbone - 06-19-2018, 08:14 PM
RE: Zenith 9S232 sensitivity control - by Arran - 06-20-2018, 02:57 AM



Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 9256 online users. [Complete List]
» 2 Member(s) | 9254 Guest(s)
AvatarAvatar

>