Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Ron's RCA T7-5 Electronic Rescue
#47

[Image: http://www.philcoradio.com/images/phorum...-5_051.jpg]

Here is the third electrolytic, all restuffed and waiting for me to solder the proper connector on the positive end. Then it will be mounted on the chassis.

It contains two Solen Fast 8.2 uF caps connected in parallel for a total of 16.4 uF. Slightly less than 18 but should be OK given the very loose tolerances of electrolytics back in the day.

Why didn't you use two 10s, or a 10 and an 8.2?

Simple - those combinations would not have fit in this can. As it was, I had to modify the top of this can to make it work. Even then, two 8.2 uF caps just barely fit inside. They are truly jammed in there.

I checked for shorts and there were none. Then I tested its capacitance - 16.74 uF. Icon_thumbup

I am hoping to fire this radio up for the first time this weekend.

Oh, by the way, I shall face another problem soon - how to get the dial pointer off so that I may replace the dial scale. That pointer is really frozen on the shaft thanks to rust. Any suggestions welcome.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Ron's RCA T7-5 Electronic Rescue - by Ron Ramirez - 06-03-2018, 02:38 PM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-05-2018, 05:20 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-10-2018, 12:06 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-14-2018, 03:23 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-15-2018, 02:14 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-17-2018, 02:50 AM
RE: Ron's RCA T7-5 Electronic Rescue - by KCMike - 06-17-2018, 07:09 PM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-18-2018, 03:41 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-21-2018, 05:08 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Ron Ramirez - 06-21-2018, 09:32 PM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-22-2018, 04:27 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 06-24-2018, 03:42 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 07-04-2018, 04:17 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 07-06-2018, 12:21 AM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 07-11-2018, 06:16 PM
RE: Ron's RCA T7-5 Electronic Rescue - by Arran - 07-13-2018, 10:57 PM



Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
Gloritone 27 Radio
Another make I have seen from U.S Radio and Television was Apex Electric, or U.S Apex, the badge on some of those had a ...Arran — 12:56 AM
Philco 46-480 Electronic Restoration
I’ve consulted a couple of the books which I got from Jim Koehler, Elements of Radio Servicing (Marcus and Levy, 1947) a...jrblasde — 10:58 PM
Gloritone 27 Radio
Richard, Radiotrope was one of the many nameplates coming out of the Marion, Indiana U.S. Radio and Television Corp plan...Eliot Ness — 10:12 PM
[split] New member...
Oh... That link is gold man! Thank you so much. I'll see if I can get this thing fixed and will post the results on...HowardWoodard — 08:10 PM
[split] New member...
Gosh. I always re-discovered how to do it, took me 2-3 minutes every time. Now that I think of it, the c-clip is there b...morzh — 07:17 PM
38-690 Gill Cloth
Yeah, this one is not a chevron pattern. Ask Mike Katz, if he has something that is similar.morzh — 07:02 PM
38-690 Gill Cloth
Hi Folks, Is anyone currently selling a good reproduction of the 38-890 grill cloth? Thanks Stevetargeteye — 06:57 PM
[split] New member...
@morzh: As you can see from the pics I included, there is no clip where the vernier shaft comes out of the brass coarse ...HowardWoodard — 06:56 PM
[split] New member...
I think where the shaft comes out of the brass piece, there should be a clip.morzh — 06:47 PM
Philco 46-480 Electronic Restoration
Well, you're right but the AVC gets to the control grid through the IF secondary, no direct connection to the control gr...RodB — 06:36 PM

[-]
Who's Online
There are currently no members online.

>