06-26-2018, 10:23 PM
B+ is derived from the AC line, 160v caps are fine.
Considering the voltage drop within rectifier, B+ will likely never be greater than 135V(in fact is listed as 117.4 & 119v on chart).
NOW, since the voltage on pins on 4 & 8 is different, is there a resistor between these two points? Cathodes should be tied together.
Considering the voltage drop within rectifier, B+ will likely never be greater than 135V(in fact is listed as 117.4 & 119v on chart).
NOW, since the voltage on pins on 4 & 8 is different, is there a resistor between these two points? Cathodes should be tied together.
Tom