Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Lowe HF-225
#5

Parts arrived for this at last. Finding time to tinker is another problem, as I can't resist fiddling with that RCA further up the board Icon_smile

I don't hold with furniture that talks.


Messages In This Thread
Lowe HF-225 - by EdHolland - 06-06-2018, 06:46 PM
RE: Lowe HF-225 - by EdHolland - 06-10-2018, 12:08 AM
RE: Lowe HF-225 - by EdHolland - 06-12-2018, 01:13 PM
RE: Lowe HF-225 - by EdHolland - 06-26-2018, 01:43 PM
RE: Lowe HF-225 - by EdHolland - 07-27-2018, 04:27 PM
RE: Lowe HF-225 - by EdHolland - 09-01-2018, 06:44 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 40-120C Filament Wiring
Is the tube in your radio actually 35Z3 or 35Y4, or something else?morzh — 10:55 PM
Philco 630csx power cord
Second Rich's opinion. Run a separate antenna wire. Use a separate plug. Rich Where did you get this wire? Se...morzh — 10:51 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. - your 0.047 caps are fried in both Th...morzh — 10:40 PM
Philco 630csx power cord
Hello Tynwald , I would not use that plug and what I would do is us Some of this cloth covered wire ! you can also buy...radiorich — 10:28 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. The voltages are the same except #4....R3Sons — 09:29 PM
Philco 40-120C Filament Wiring
Let's try to sort it out. So we are working with the same info here's the schematic I have: ...and here's the pin o...klondike98 — 09:03 PM
Philco 630csx power cord
I posted this on FB but knowing that not all of us use social media, it seemed sensible to ask my question here.  I r...Tynwald — 08:07 PM
Philco 40-155
At last, got this working well. Impressed has really nice reception and tone. Had a bad connection on one of the capaci...rogerh — 07:44 PM
Philco 91 Restore Code ??
Or you could just square the current :lol: As for the values, they are dependent on the 1 or 2-speaker system. The...morzh — 05:46 PM
Philco 91 Restore Code ??
If you know the fc resistance you can use 120 ma nominal current through the resistor to get the voltage drop then calcu...RodB — 05:21 PM

[-]
Who's Online
There are currently 2491 online users. [Complete List]
» 2 Member(s) | 2489 Guest(s)
AvatarAvatar

>