Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New to Forum- 47-1230 is my 1st Restoration
#2

Hi Greg and welcome,
Here's the online Philco service info for your 47-1230:  http://www.audiophool.com/Philco.html
Scroll down to 1947 and click on 47-1230.

> 47-1230 has a list of the caps and resistors needed that I could have to get those items on order?
Not that I know of but you can be the 1st! It's simple enough to do. On the caps goto the parts
list for each section and look for cap values that end in mf, mfd, ufd, or uf (they're all equivalent).
These are the one you'll want to replace. Just about all of these will be a fraction of a mf. There will
be 3 or 4 that are several mf those are electrolytic caps.
For now ignore the ones that end in mmf, mmfd, or pf. These are typically are made from different
materials and age much better.

Resistors For the most part are going to be 1/2watt @ the resistance noted by the color bands.
Tolerance of 20%. I measure them before replacement to see if they are within the tolerance.

> where I can get quality at affordable prices that would be great to know as well.
http://www.tuberadios.com/capacitors/

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry


Messages In This Thread
RE: New to Forum- 47-1230 is my 1st Restoration - by Radioroslyn - 08-06-2018, 08:45 AM



Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
Atwater-Kent 84, restoration.
Hello Mike, Wow ! far as my AK it does work and the cabinet is in nice shape so is my chassis anyway here is a photo of...radiorich — 02:59 AM
Atwater-Kent 84, restoration.
Nice radio, Mike! Here's hoping it was well rebuilt. Take care and BE HEALTHY! GaryGarySP — 12:12 AM
Atwater-Kent 84, restoration.
Rich yes, this is the way I got it. I have just put it on the table and took it apart. I suspect it even might work,...morzh — 11:31 PM
Atwater-Kent 84, restoration.
Hello mike, What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM
91H Code 126 Restore
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM
Atwater-Kent 84, restoration.
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct. So the c...morzh — 09:41 PM
An attempt to remove the Field Coil from a G speaker
Arran Yours probably then the H speaker, same as mine.morzh — 08:39 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM

[-]
Who's Online
There are currently no members online.

>