Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5

The White Elephant 116B
#1

The cabinet for the 116B I'm working on was painted white  Icon_rolleyes
I know this can be good if it helped preserved the veneer over the years; bad if its hiding something ugly and bad because it can be difficult to get all the white out of the nooks, crannies and grain.  

[Image: https://www.dropbox.com/s/nwjrbsqayso55r....jpg?raw=1]

The escutcheon and dial glass are in pretty good shape.  A small bit of paint flaking off on the dial glass but not too bad.  Unless I mess it up along the way I will reinstall it.  

[Image: https://www.dropbox.com/s/qnh218zzn7bi8o....jpg?raw=1]

The grill cloth will be replaced with Kenneth Richmond's chevron cloth.  The one in the cabinet was both glued and stapled with 16 one-half inch staples.  Guess they were afraid it was going to come loose...  Icon_lol

[Image: https://www.dropbox.com/s/3ngzpl6smhpsw7....jpg?raw=1]
[Image: https://www.dropbox.com/s/tns5m2ksmnsreg....jpg?raw=1]

The glued side came up but took a little of the cardboard with it.  Fortunately it will all be covered with the new grill cloth and structurally its sound.

[Image: https://www.dropbox.com/s/l47nigy8e3m1yo....jpg?raw=1]

I wanted to get a look at what is under the white paint so I could decide if the cabinet would be a keeper or not.  I used the CitriStrip product since I'm working indoors and it got a lot of the paint off.  A little odorless mineral spirit wipe took some more and the wood under the paint looks very nice.  Just have to wonder what people were thinking when they painted it white.  Whoever did the painting actually used some type of white primer and then a white topcoat.   I think to get all the paint off I'm going to have to use a serious stripper with a small brush and do it outside.  It will have to wait until spring   Icon_sad

[Image: https://www.dropbox.com/s/zd1cgtemu367ms....jpg?raw=1]
[Image: https://www.dropbox.com/s/kmlyy3t4gwc8ul....jpg?raw=1]


Messages In This Thread
The White Elephant 116B - by klondike98 - 11-15-2018, 01:24 PM
RE: The White Elephant 116B - by Phlogiston - 11-15-2018, 08:55 PM
RE: The White Elephant 116B - by Arran - 11-15-2018, 11:06 PM
RE: The White Elephant 116B - by klondike98 - 11-16-2018, 10:00 AM
RE: The White Elephant 116B - by John Bartley - 11-17-2018, 11:10 AM
RE: The White Elephant 116B - by Paul Philco322 - 11-17-2018, 11:16 AM
RE: The White Elephant 116B - by klondike98 - 11-17-2018, 12:25 PM
RE: The White Elephant 116B - by Paul Philco322 - 11-17-2018, 04:25 PM
RE: The White Elephant 116B - by Arran - 11-18-2018, 04:12 AM
RE: The White Elephant 116B - by OldRestorer - 11-18-2018, 09:30 AM
RE: The White Elephant 116B - by John Bartley - 11-18-2018, 09:40 AM
RE: The White Elephant 116B - by klondike98 - 05-20-2019, 04:55 PM
RE: The White Elephant 116B - by KCMike - 05-20-2019, 06:20 PM
RE: The White Elephant 116B - by klondike98 - 05-20-2019, 11:25 PM
RE: The White Elephant 116B - by Phlogiston - 05-21-2019, 11:26 AM



Users browsing this thread: 8 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 9606 online users. [Complete List]
» 1 Member(s) | 9605 Guest(s)
Avatar

>