Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Packard Bell 48D re-cap
#7

Unless you mean the antenna tuning cap is grounded on both sides of the base, (I construed it that both sides of the cap are grounded) - only one side should be. It could ohm out as grounded due to the low antenna coil resistance, but it should not be grounded.

I am also not sure what you mean by:"I get an AF signal loud and clear from the 2nd IF transformer on."

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.


Messages In This Thread
Packard Bell 48D re-cap - by lasurveyor - 12-08-2018, 02:42 PM
RE: Packard Bell 48D re-cap - by jcassity - 12-09-2018, 01:55 PM
RE: Packard Bell 48D re-cap - by David - 12-09-2018, 02:20 PM
RE: Packard Bell 48D re-cap - by morzh - 12-09-2018, 02:24 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-10-2018, 05:16 PM
RE: Packard Bell 48D re-cap - by morzh - 12-10-2018, 05:40 PM
RE: Packard Bell 48D re-cap - by jcassity - 12-10-2018, 05:48 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-10-2018, 06:40 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-10-2018, 06:45 PM
RE: Packard Bell 48D re-cap - by David - 12-10-2018, 07:21 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-20-2018, 01:04 PM
RE: Packard Bell 48D re-cap - by Phlogiston - 12-20-2018, 01:33 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-20-2018, 06:15 PM
RE: Packard Bell 48D re-cap - by jcassity - 12-21-2018, 12:15 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-21-2018, 12:30 PM
RE: Packard Bell 48D re-cap - by jcassity - 12-21-2018, 12:38 PM
RE: Packard Bell 48D re-cap - by jcassity - 12-21-2018, 12:41 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-24-2018, 04:23 PM
RE: Packard Bell 48D re-cap - by David - 12-24-2018, 10:09 PM
RE: Packard Bell 48D re-cap - by lasurveyor - 12-25-2018, 10:45 AM
RE: Packard Bell 48D re-cap - by OldRestorer - 12-27-2018, 08:13 AM
RE: Packard Bell 48D re-cap - by jcassity - 12-27-2018, 12:09 PM



Users browsing this thread: 7 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently no members online.

>