Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 80B Won't play
#6

Well lemme scratch my head a bit hummmm
Check #26 grid bias seems a bit low on the 42 tube.
Check #19 screen voltage seems to low on the det tube. That's a little tricky to measure as they don't tell if the det is oscillating or not. That will affect the readings.
Check #6 That will affect the control grid voltage on the mixer.
How much voltage do you have across #36?
Have you tried the align the if trimmer (#17) to 450kc? (frequency not regeneration)
Check #7 and #12 by making sure there not short to the chaiss and loosen the adj nut and retighten it to about where it was set before.
Check the the two windings on the osc coil for resistance should very low a few ohms if good
I think I would start at the speaker side of things and work towards the ant. Get bias up a bit on the 42 tube and align the 450kc if and get the if to regenerate. (I'll bet the #19,20,22,and 11 are bad)
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry


Messages In This Thread
Model 80B Won't play - by SteveJB - 11-01-2010, 03:33 PM
Re: Model 80B Won't play - by exray - 11-01-2010, 03:41 PM
Re: Model 80B Won't play - by SteveJB - 11-01-2010, 03:56 PM
Re: Model 80B Won't play - by 7estatdef - 11-01-2010, 05:27 PM
Re: Model 80B Won't play - by SteveJB - 11-01-2010, 08:23 PM
Re: Model 80B Won't play - by 7estatdef - 11-01-2010, 09:14 PM
Re: Model 80B Won't play - by SteveJB - 11-01-2010, 09:33 PM
Re: Model 80B Won't play - by 7estatdef - 11-01-2010, 09:51 PM
Re: Model 80B Won't play - by Steve Davis - 11-01-2010, 10:09 PM
Re: Model 80B Won't play - by codefox1 - 11-02-2010, 11:00 AM
Re: Model 80B Won't play - by 7estatdef - 11-02-2010, 05:17 PM
Re: Model 80B Won't play - by Ron Ramirez - 11-02-2010, 06:02 PM
Re: Model 80B Won't play - by 7estatdef - 11-02-2010, 09:28 PM
Re: Model 80B Won't play - by Ron Ramirez - 11-04-2010, 06:36 PM



Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Milkjug plastic?morzh — 09:36 PM
An attempt to remove the Field Coil from a G speaker
Yep. 'Cause when I heard "buibble" I immediately thought of this and started wondering how this poly...morzh — 09:33 PM
An attempt to remove the Field Coil from a G speaker
Blister Pack, that's what I was trying to remember!RodB — 09:29 PM
An attempt to remove the Field Coil from a G speaker
In the packaging biz we refer to the package as a clamshell or blister pack if on a cardboard. So we are using the packa...Paul Philco322 — 08:13 PM
Philco 46-480 Electronic Restoration
It’s been too cold to solder in the garage the last couple of evenings, but it has allowed me more time to search for th...jrblasde — 07:23 PM
An attempt to remove the Field Coil from a G speaker
The part/tool you get from HD is inside the plastic, like in a bubble.RodB — 07:17 PM
An attempt to remove the Field Coil from a G speaker
Got it. Still did not get the "Bubble" part.morzh — 07:10 PM
An attempt to remove the Field Coil from a G speaker
No Mike. Clear plastic from the packaging of items you buy at Home Depot, the ones you can't open without a hack saw or ...RodB — 05:48 PM
Philco 89 indicator light.
Well thankfully that did not happen.Jim Dutridge — 05:21 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM

[-]
Who's Online
There are currently 9401 online users. [Complete List]
» 1 Member(s) | 9400 Guest(s)
Avatar

>