RCA V-210 field coil removal

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

RCA V-210 field coil removal

Steve D
Member

Posts: 116
Threads: 25
Joined: Jul 2006
City: Lebanon, NJ 08833

#16

03-21-2019, 09:09 AM

Thanks, EdHolland. I found an old 5lb spool of non ROHS 34AWG magnet wire here at work and we have an old winding machine that is used for prototyping which I can use. I just have to design a mandrel to mount and hold the bobbin.

I measured and calculated the voice coil gap to be about 0.040" and the diameter is 1", so to center the pole piece when pressing it back in I need to find a circular tube of that thickness and outer diameter. It can be metal, plastic, FR4 or even cardboard as long as it centers the pole piece and doesn't move as I press it it. We have a number of FR4 tubes that we use for bobbins and HV insulators here at work so I will have to search through them and hopefully I'll find a suitable one or one that I can machine to the proper dimensions.

Steve D

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

RCA V-210 field coil removal - by Steve D - 03-05-2019, 05:07 PM

RE: RCA V-210 field coil removal - by Steve Davis - 03-05-2019, 05:44 PM

RE: RCA V-210 field coil removal - by Steve D - 03-08-2019, 05:15 PM

RE: RCA V-210 field coil removal - by Arran - 03-09-2019, 06:11 AM

RE: RCA V-210 field coil removal - by tbone - 03-09-2019, 10:24 AM

RE: RCA V-210 field coil removal - by morzh - 03-09-2019, 11:54 AM

RE: RCA V-210 field coil removal - by tbone - 03-09-2019, 01:48 PM

RE: RCA V-210 field coil removal - by Steve D - 03-10-2019, 12:52 PM

RE: RCA V-210 field coil removal - by Arran - 03-11-2019, 05:41 AM

RE: RCA V-210 field coil removal - by sdradioman - 03-11-2019, 07:17 AM

RE: RCA V-210 field coil removal - by Phlogiston - 03-11-2019, 11:36 AM

RE: RCA V-210 field coil removal - by morzh - 03-11-2019, 11:49 AM

RE: RCA V-210 field coil removal - by Steve D - 03-19-2019, 04:08 PM

RE: RCA V-210 field coil removal - by Steve D - 03-19-2019, 04:13 PM

RE: RCA V-210 field coil removal - by EdHolland - 03-19-2019, 09:29 PM

RE: RCA V-210 field coil removal - by Steve D - 03-21-2019, 09:09 AM

RE: RCA V-210 field coil removal - by Phlogiston - 03-21-2019, 11:38 AM

RE: RCA V-210 field coil removal - by Steve D - 03-23-2019, 05:46 PM

RE: RCA V-210 field coil removal - by klondike98 - 03-24-2019, 10:43 PM

RE: RCA V-210 field coil removal - by Steve D - 04-08-2019, 01:34 PM

RE: RCA V-210 field coil removal - by Steve D - 04-08-2019, 01:37 PM

RE: RCA V-210 field coil removal - by Steve D - 04-29-2019, 04:34 PM

RE: RCA V-210 field coil removal - by Steve D - 04-29-2019, 04:36 PM

RE: RCA V-210 field coil removal - by Steve D - 05-06-2019, 10:48 AM

RE: RCA V-210 field coil removal - by Steve D - 05-06-2019, 10:50 AM

RE: RCA V-210 field coil removal - by morzh - 05-06-2019, 11:19 AM

RE: RCA V-210 field coil removal - by sdradioman - 05-06-2019, 01:53 PM

RE: RCA V-210 field coil removal - by Steve D - 05-16-2019, 11:23 AM

View a Printable Version

Users browsing this thread: 5 Guest(s)

Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM

Who's Online

There are currently 10459 online users. [Complete List]
» 2 Member(s) | 10457 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me