Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Couple of questions on a 60
#7

Re-read my post.

Shotgun testing is not the answer, it amounts to attempting to get lucky. Like playing the Lottery, not gonna happen. I don't have your chassis on my bench so I do not know the relationship of the "white wire".

Follow my post you should be able to zero in in on the section of the B+ that is drawing to much current.

By creatively removing the various loads from the B+ either live or using the VOM to monitor B+ resistance while un-soldering various loads. You did that with the white wire but that is just about the total load. Disconnect after the field coil.

Note I said VOM for the resistance measurements, a DVM could give erroneous readings in this application...

I can't recommend doing this as a live voltage test, the fault is drawing way to much current...

GL

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”


Messages In This Thread
Couple of questions on a 60 - by Patrick - 05-28-2019, 12:32 PM
RE: Couple of questions on a 60 - by morzh - 05-28-2019, 01:47 PM
RE: Couple of questions on a 60 - by Ron Ramirez - 05-28-2019, 05:06 PM
RE: Couple of questions on a 60 - by Patrick - 05-28-2019, 05:25 PM
RE: Couple of questions on a 60 - by Chas - 05-28-2019, 05:26 PM
RE: Couple of questions on a 60 - by Patrick - 05-29-2019, 02:15 PM
RE: Couple of questions on a 60 - by Chas - 05-29-2019, 03:18 PM
RE: Couple of questions on a 60 - by morzh - 05-29-2019, 03:21 PM
RE: Couple of questions on a 60 - by Patrick - 05-29-2019, 05:20 PM
RE: Couple of questions on a 60 - by Chas - 05-29-2019, 08:34 PM
RE: Couple of questions on a 60 - by Patrick - 05-29-2019, 09:46 PM
RE: Couple of questions on a 60 - by morzh - 05-29-2019, 10:43 PM
RE: Couple of questions on a 60 - by Patrick - 05-30-2019, 05:53 AM
RE: Couple of questions on a 60 - by Patrick - 05-30-2019, 06:37 AM
RE: Couple of questions on a 60 - by Patrick - 05-30-2019, 07:28 AM
RE: Couple of questions on a 60 - by morzh - 05-30-2019, 08:44 AM
RE: Couple of questions on a 60 - by Patrick - 05-30-2019, 10:30 AM
RE: Couple of questions on a 60 - by Chas - 05-30-2019, 04:41 PM
RE: Couple of questions on a 60 - by Patrick - 05-31-2019, 06:17 AM
RE: Couple of questions on a 60 - by morzh - 05-31-2019, 08:53 AM
RE: Couple of questions on a 60 - by Patrick - 05-31-2019, 09:52 AM
RE: Couple of questions on a 60 - by morzh - 05-31-2019, 01:27 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Mike, Lookup  murrayatuptown on ARF. Seems he has a dilemma with surplus field coils. Could get lucky and have what y...Chas — 01:26 PM
Atwater-Kent 84, restoration.
Hello Mike, I have not checked to see if my console has a fuse or not and far as sets go I have early 30s General Motor...radiorich — 11:25 AM
Atwater-Kent 84, restoration.
Ron I forgot, but when you said "phone number", I remembered, caus I usually remember how I act when I need...morzh — 11:12 AM
Atwater-Kent 84, restoration.
You have an extensive collection of Philcos, Mike! I’m always excited to see each new one. Agreed on the power supply fu...jrblasde — 10:50 AM
462ron
Hi Mike, that 84 sure looks great. You don’t often see these antique radios with a fuse like yours has. I usually instal...462ron — 10:22 AM
Atwater-Kent 84, restoration.
Hello Mike, Wow ! far as my AK it does work and the cabinet is in nice shape so is my chassis anyway here is a photo of...radiorich — 02:59 AM
Atwater-Kent 84, restoration.
Nice radio, Mike! Here's hoping it was well rebuilt. Take care and BE HEALTHY! GaryGarySP — 12:12 AM
Atwater-Kent 84, restoration.
Rich yes, this is the way I got it. I have just put it on the table and took it apart. I suspect it even might work,...morzh — 11:31 PM
Atwater-Kent 84, restoration.
Hello mike, What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM
91H Code 126 Restore
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM

[-]
Who's Online
There are currently 3513 online users. [Complete List]
» 3 Member(s) | 3510 Guest(s)
AvatarAvatarAvatar

>