Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Very good, Mike..and very impressive.
All:
Four tube shields arrived today from a friend in Lexington. They are now installed on the chassis.
I also took the time to remove the two rivets holding the Candohm in place. Most of the wires are still attached to it. It has so many terminals that I intentionally left it this way to (hopefully) make it easier to know which wire goes where on the new assembly and to reduce the possibility of errors in wiring up the new assembly.
Tomorrow afternoon...hopefully...the installation of new resistors to replace the Candohm begins.
--
Ron Ramirez
Ferdinand IN
Messages In This Thread
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-14-2019, 08:27 PM
Users browsing this thread: 4 Guest(s)
|
Recent Posts
|
462ron
|
Hi Howard, if memory serves, and many times it doesn’t, I vaguely remember working on a Philco that had that pin you hav...462ron — 09:00 AM |
Gloritone 27 Radio
|
Hello John,
Thanks for the information and Arran I have heard of Wells Gardner and I have heard of Apex but I did not ...radiorich — 08:17 AM |
Gloritone 27 Radio
|
Another make I have seen from U.S Radio and Television was Apex Electric, or U.S Apex, the badge on some of those had a ...Arran — 12:56 AM |
Philco 46-480 Electronic Restoration
|
I’ve consulted a couple of the books which I got from Jim Koehler, Elements of Radio Servicing (Marcus and Levy, 1947) a...jrblasde — 10:58 PM |
Gloritone 27 Radio
|
Richard, Radiotrope was one of the many nameplates coming out of the Marion, Indiana U.S. Radio and Television Corp plan...Eliot Ness — 10:12 PM |
[split] New member...
|
Oh... That link is gold man! Thank you so much.
I'll see if I can get this thing fixed and will post the results on...HowardWoodard — 08:10 PM |
[split] New member...
|
Gosh. I always re-discovered how to do it, took me 2-3 minutes every time.
Now that I think of it, the c-clip is there b...morzh — 07:17 PM |
38-690 Gill Cloth
|
Yeah, this one is not a chevron pattern.
Ask Mike Katz, if he has something that is similar.morzh — 07:02 PM |
38-690 Gill Cloth
|
Hi Folks,
Is anyone currently selling a good reproduction of the 38-890 grill cloth?
Thanks
Stevetargeteye — 06:57 PM |
[split] New member...
|
@morzh: As you can see from the pics I included, there is no clip where the vernier shaft comes out of the brass coarse ...HowardWoodard — 06:56 PM |
Who's Online
|
There are currently no members online. |
|

|