Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 6-S-1-whatever
#72

Thanks Greg, Steve, Bob - much appreciated.

Tonight I removed the volume control from the 6-S-254 chassis which normally resides in the house garage, so I guess it is now officially a parts chassis. I desoldered the volume control's terminals, opened up the control and cleaned it (and its associated off-on switch) with DeoxIT, followed by cleaning the control with FaderLube.

I then put it back together and tested it with my multimeter. The control is smooth (according to the multimeter) from "off" to full open.

I'll install it into the 6-S-128 chassis in the next day or two. I think I will install new tuning condenser grommets while I'm at it. This will mean taking the dial assembly apart again, but I think it will be worth the extra effort. The grommets (and chassis supports) won't be here until Saturday.

Greg, thanks for the tip re: using silicone to hold the chassis supports in place. I will do that. Icon_thumbup

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:04 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:08 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:12 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 02:21 PM
RE: Zenith 6-S-1-whatever - by PhilcoJohn - 11-03-2019, 07:20 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-03-2019, 07:39 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 07:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-03-2019, 07:49 PM
RE: Zenith 6-S-1-whatever - by KCMike - 11-03-2019, 10:11 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-03-2019, 10:12 PM
RE: Zenith 6-S-1-whatever - by morzh - 11-04-2019, 12:14 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-05-2019, 10:43 PM
RE: Zenith 6-S-1-whatever - by rfeenstra - 11-05-2019, 10:49 PM
RE: Zenith 6-S-1-whatever - by GarySP - 11-05-2019, 11:03 PM
RE: Zenith 6-S-1-whatever - by mikethedruid - 11-05-2019, 11:30 PM
RE: Zenith 6-S-1-whatever - by morzh - 11-06-2019, 10:17 AM
RE: Zenith 6-S-1-whatever - by WyTex - 11-08-2019, 06:52 AM
RE: Zenith 6-S-1-whatever - by OldRestorer - 11-10-2019, 08:35 AM
RE: Zenith 6-S-1-whatever - by radiohenry - 11-11-2019, 12:45 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-13-2019, 07:56 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-13-2019, 08:04 PM
RE: Zenith 6-S-1-whatever - by KCMike - 11-13-2019, 08:25 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-13-2019, 09:39 PM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-14-2019, 10:10 AM
RE: Zenith 6-S-1-whatever - by morzh - 11-14-2019, 10:37 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-14-2019, 01:29 PM
RE: Zenith 6-S-1-whatever - by morzh - 11-14-2019, 05:03 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-14-2019, 08:27 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-14-2019, 08:38 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-15-2019, 11:51 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-15-2019, 11:59 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-16-2019, 12:04 AM
RE: Zenith 6-S-1-whatever - by Nathan Slingerland - 11-16-2019, 12:46 AM
RE: Zenith 6-S-1-whatever - by PhilcoJohn - 11-16-2019, 08:26 AM
RE: Zenith 6-S-1-whatever - by 462ron - 11-16-2019, 09:54 AM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-16-2019, 10:01 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-16-2019, 10:53 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-16-2019, 11:12 PM
RE: Zenith 6-S-1-whatever - by klondike98 - 11-17-2019, 09:28 AM
RE: Zenith 6-S-1-whatever - by Ed Locker - 11-17-2019, 10:36 AM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-17-2019, 10:50 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-17-2019, 11:53 AM
RE: Zenith 6-S-1-whatever - by KCMike - 11-17-2019, 12:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-17-2019, 07:57 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-17-2019, 08:22 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-17-2019, 08:26 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-17-2019, 08:36 PM
RE: Zenith 6-S-1-whatever - by Jake Blake - 11-17-2019, 08:51 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-22-2019, 10:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-23-2019, 02:29 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 08:51 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 05:07 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 05:24 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 05:33 PM
RE: Zenith 6-S-1-whatever - by Ed Locker - 11-23-2019, 08:01 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-23-2019, 11:04 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 01:50 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-24-2019, 08:51 AM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 02:49 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 03:37 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-24-2019, 10:23 PM
RE: Zenith 6-S-1-whatever - by rfeenstra - 11-24-2019, 10:46 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-24-2019, 11:53 PM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-25-2019, 10:15 PM
RE: Zenith 6-S-1-whatever - by KCMike - 11-25-2019, 11:17 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-26-2019, 12:44 AM
RE: Zenith 6-S-1-whatever - by Eliot Ness - 11-26-2019, 10:13 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-26-2019, 10:18 PM
RE: Zenith 6-S-1-whatever - by NostalgiaRadioTime - 11-26-2019, 11:38 PM
RE: Zenith 6-S-1-whatever - by Steve Davis - 11-26-2019, 11:56 PM
RE: Zenith 6-S-1-whatever - by klondike98 - 11-27-2019, 10:54 AM
RE: Zenith 6-S-1-whatever - by Ron Ramirez - 11-27-2019, 10:08 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
462ron
Hi Howard, if memory serves, and many times it doesn’t, I vaguely remember working on a Philco that had that pin you hav...462ron — 09:00 AM
Gloritone 27 Radio
Hello John, Thanks for the information and Arran I have heard of Wells Gardner and I have heard of Apex but I did not ...radiorich — 08:17 AM
Gloritone 27 Radio
Another make I have seen from U.S Radio and Television was Apex Electric, or U.S Apex, the badge on some of those had a ...Arran — 12:56 AM
Philco 46-480 Electronic Restoration
I’ve consulted a couple of the books which I got from Jim Koehler, Elements of Radio Servicing (Marcus and Levy, 1947) a...jrblasde — 10:58 PM
Gloritone 27 Radio
Richard, Radiotrope was one of the many nameplates coming out of the Marion, Indiana U.S. Radio and Television Corp plan...Eliot Ness — 10:12 PM
[split] New member...
Oh... That link is gold man! Thank you so much. I'll see if I can get this thing fixed and will post the results on...HowardWoodard — 08:10 PM
[split] New member...
Gosh. I always re-discovered how to do it, took me 2-3 minutes every time. Now that I think of it, the c-clip is there b...morzh — 07:17 PM
38-690 Gill Cloth
Yeah, this one is not a chevron pattern. Ask Mike Katz, if he has something that is similar.morzh — 07:02 PM
38-690 Gill Cloth
Hi Folks, Is anyone currently selling a good reproduction of the 38-890 grill cloth? Thanks Stevetargeteye — 06:57 PM
[split] New member...
@morzh: As you can see from the pics I included, there is no clip where the vernier shaft comes out of the brass coarse ...HowardWoodard — 06:56 PM

[-]
Who's Online
There are currently 2507 online users. [Complete List]
» 4 Member(s) | 2503 Guest(s)
AvatarAvatarAvatarAvatar

>