Philco 7053
|
Any of you guys have and used this tester?Martinj — 09:27 PM |
6TPZ and 5TPO Radio Help
|
I would test all, but the X6 is the main suspect.
The output is the autotransformer, and it also could potentially ha...morzh — 09:13 PM |
6TPZ and 5TPO Radio Help
|
Yes, I tested them out of the circuits. I posted my measurements where the first letter was red and the second was blac...R3Sons — 08:52 PM |
6TPZ and 5TPO Radio Help
|
1. Have you tested out of circuit?
2. If yes, any transistor not showing E-C as OL is bad.
From your measurements, all...morzh — 08:27 PM |
42-345 Resistors
|
In short (I a sure you've seen the video Rich provided), safety caps are X and Y.
X caps are placed across the Line/Neu...morzh — 08:21 PM |
Restoring Philco 96
|
Today I decided to take on gutting the big bad cap block.
I gave up on the same one from the 86 before, so I was not sur...morzh — 08:13 PM |
42-345 Resistors
|
To not replace is to put it on the list to do later when they cook up! As a radio guy would say back in the day, lets sp...Paul Philco322 — 07:19 PM |
6TPZ and 5TPO Radio Help
|
Here's the readings from the AR14 (No markings on the one from the 5TPO) on the 6TPZ:
B-E OL
E-B .14
B-C 2.9
C-B .13...R3Sons — 04:17 PM |
6TPZ and 5TPO Radio Help
|
Thank you all so much. First the power supply: "KORAD KA3005P - Programmable Precision Variable Adjustable 30V, 5A...R3Sons — 03:48 PM |
6TPZ and 5TPO Radio Help
|
Perhaps I am missing something - which volume (AR-28 or AR-33) has the 6TPZ?DaleHCook — 12:16 PM |